lnlp
commented
4 years ago I apparently missed the following in the README:
When the messages slow down press the Enter key a couple of times until you see the following
Welcome to HassOS hassio login:
So, pressing Enter one or more times just fixed it and showed the login prompt.
System: NUC P7JYH with new Proxmox 6.1-1 install. CPU: Pentium Silver J5005 quad-core, memory: 16GB. (There is sufficient CPU, memory and disk space in the host for the VM to start.)
Problem: After the script has created the
hassosova-3.10VM and the VM is started and the console is opened, then everything appears to start normal but then the console hangs (and nothing further happens).This is the point where it hangs. This is where the Login prompt should appear next, but it does not. It just hangs and still hangs after many hours.
I have tried this several times and also have re-installed the VM several times but the behavior is very consistent.
Strange enough hassio itself does start and I am able to access it via the hassio web ui. But something goes wrong during the boot process. I don't know what and why and what the results of the hanging console/boot process are.
(Enabling or disabling the QEMU Guest Agent as described in #46 makes no difference.)
I have installed the SSH & Web Terminal add-on (with protection off to get full access to the system) and opened the Web Terminal in hope to find any useful information in boot.log but there are no logfiles at all in /var/log.
Any ideas for how to fix or how to debug this are welcome.