Backlight stays lit when scanning through memory channels or frequency

[lyczewskiand]

Used website https://whosmatt.github.io/uvmod/ to compile and write firmware to my UV-K5 and backlight stays lit when scanning through memory channels or frequency. Unfortunately I do not remember exact options I chose but for sure:

• Apps: RSSI, S-Meter and battery voltage readout on the main screen. By @piotr022, v78.
• Battery icon: Changes the battery icon to a more normal looking variant.
• Increase Mic Gain: Gives the microphone gain an additional boost, making the microphone generally more sensitive.
• NOAA Frequencies
• Custom Frequency Ranges: Simple Mode: Extend Band 1 down to 18 MHz and Band 7 up to 1300 MHz. This is the maximum frequency range of the chip.

[whosmatt]

this is just a bug in the v26 and v27 firmware unrelated to uvmod

On Fri, Nov 17, 2023, 22:35 lyczewskiand @.***> wrote:

Used website https://whosmatt.github.io/uvmod/ to compile and write firmware to my UV-K5 and backlight stays lit when scanning through memory channels or frequency. Unfortunately I do not remember exact options I chose but for sure:

• Apps: RSSI, S-Meter and battery voltage readout on the main screen. By @piotr022 https://github.com/piotr022, v78.
• Battery icon: Changes the battery icon to a more normal looking variant.
• Increase Mic Gain: Gives the microphone gain an additional boost, making the microphone generally more sensitive.
• NOAA Frequencies
• Custom Frequency Ranges: Simple Mode: Extend Band 1 down to 18 MHz and Band 7 up to 1300 MHz. This is the maximum frequency range of the chip.

— Reply to this email directly, view it on GitHub https://github.com/whosmatt/uvmod/issues/30, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACSFI22V5QIWDCBJMJB7NHLYE7KAJAVCNFSM6AAAAAA7QMQ6IKVHI2DSMVQWIX3LMV43ASLTON2WKOZRHE4TSOJWGQZDGMQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>