search

wiedehopf / tar1090

Provides an improved webinterface for use with ADS-B decoders readsb / dump1090-fa
Other
1.22k stars 224 forks source link

Update install.sh for rbfeeder #181

Closed vatprcyq closed 2 years ago

vatprcyq commented 2 years ago

tar1090 for rbfeeder aircraft.json location update

wiedehopf commented 2 years ago

Does their default setup open port 30005 for others to use the data?

vatprcyq commented 2 years ago

Does their default setup open port 30005 for others to use the data? Port number is different Basestation at port 32459 and Beast port 32457 But access restricted localhost only Can use socat or nc to forward port for other in LAN

wiedehopf commented 2 years ago

Why would the not open the default ports of the project they forked? localhost restriction is fine, not opening the default ports is ridiculous.

I won't support them until that is changed.

wiedehopf commented 2 years ago

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder. https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

vatprcyq commented 2 years ago

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder. https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

OK change to readsb now,use network mode for rbfeeder

vatprcyq commented 2 years ago

If you want to use tar1090, plese use either dump1090-fa or readsb as a decoder. https://github.com/wiedehopf/adsb-scripts/wiki/Automatic-installation-for-readsb

readsb is recommended because it's what i'm developing.

readsb can decode MCP select ALT ,rbfeeder can't do this now