Closed mnh637 closed 5 months ago
I seem to be having same issue with Solax inverter, no rhyme nor reason that I can identity. Was working fine until integration update last few days.
Any help much appreciated 🙏
Further info, My connection is LAN ethernet to Modbus, ethernet connection stays, IP the same, integration just seems to stop communicating with the inverter.
I have similar issue. After an update it is communicating with an inverter half an hour at maximum and than it shows last values with no update. Modbus serial connection ...
2024.02.6 Introduced async communication. Can you try 2024.03.1 as that further improved the async method.
If it's still doing it on 2024.03.1 Can you get post the detailed error logs
updated, I'll see how it goes, thank you.
Thanks Will, I've also updated and has stayed connected so far (been about 6 hours), so looking good!
Thanks again for all your amazing work on this 🙌
On Tue, 5 Mar 2024, 12:40 mnh637, @.***> wrote:
updated, I'll see how it goes, thank you.
— Reply to this email directly, view it on GitHub https://github.com/wills106/homeassistant-solax-modbus/issues/782#issuecomment-1978689092, or unsubscribe https://github.com/notifications/unsubscribe-auth/AVSPLDO5IZMHWJ25U6LMOFDYWW4LPAVCNFSM6AAAAABEAWL3L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZYGY4DSMBZGI . You are receiving this because you commented.Message ID: @.***>
Just to update, the 2024.03.1 update seems to have fixed it for me, thanks Will!
I've not had any more issues either, Thanks too.
2024.03.1 actually broke mine today. Downgrading or restoring old backup did not make a difference.
Hi, I have found that removing the Wi-Fi dongle and putting it back in again, then reloading the int
From: Trevbil @.> Sent: 16 April 2024 15:16 To: wills106/homeassistant-solax-modbus @.> Cc: mnh637 @.>; State change @.> Subject: Re: [wills106/homeassistant-solax-modbus] [Bug]: no devices no entities (Issue #782)
2024.03.01 actually broke mine today.
— Reply to this email directly, view it on GitHubhttps://github.com/wills106/homeassistant-solax-modbus/issues/782#issuecomment-2059205988, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ASJPQF2NTKSKOHQPTVCZJHLY5UXFFAVCNFSM6AAAAABEAWL3L2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJZGIYDKOJYHA. You are receiving this because you modified the open/close state.Message ID: @.***>
Hi @mnh637
I have been able to solve the issue by changing to a static IP and deleting and reinstalling the integration. The integration has been working fine for over 24 hours. Fingers crossed I don't have to do anything more
Describe the bug
when it works it's great, but frequently it becomes unavailable. I have 2 solax inverters and a victron. solax ones can just go unavailable, one or the other on their own or after update, sometimes they come back sometimes not, i have been running 2 HA boxes and it can continue to work on one when the other fails, no real pattern. the victron modbus just works any update any reboot, but can't get the solax one to be stable. Can you help please. ?
Integration Version
2024.02.1
Homeassistant core version
2024.2.5
Inverter brand
Solax
Plugin used
plugin_solax.py
Serial prefix
srfq7m
Inverter firmware versions
9.03
Connection Method
Solax pocket wifi 3
Dongle firmware
3.001.02
Detailed Error Log
would you like access to my HA to play with? I've set up a second HA and would be ok with you accessing it to help me and others? wont' post details here but will open firewall to you if you can help. many thanks
Additional context
No response