Open gerben-f1 opened 3 months ago
Have you tried reversing the TXD and RXD? TX from Elfin needs to go to RX from SAJ. RX needs to go to TX. Maybe this helps?
I changed rx and tx but not workingWhat are the correct settings on the elfinFor rs232 saj sununo plu 3k-mM.v.g GerbenOp 2 jul 2024 om 09:26 heeft Wim @.***> het volgende geschreven: Have you tried reversing the TXD and RXD? TX from Elfin needs to go to RX from SAJ. RX needs to go to TX. Maybe this helps?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: @.***>
Hello, Can u help me to gett it work?
i have installed youre addon I have an elfin EE10A There are 2 connections on the elfin Ethernet and a green connector with txd rxd + - I connected an 9 pin rs232 connector to the saj inverter and the other end has 3 wires
connect the wires to the ground txd rxd And takes a 5v power and connected the plus wire to + on green connector from elvin
but i cant read out my saj inverter what do i wrong?