Unable to use oCam_viewer on Xubuntu 16.04

[kevin-george]

I have been trying to use oCam with a system running on Xubuntu 16.04

The camera shows up as a USB device with dmesg But when is run ls /dev/video*, the camera doesn't show up as a video device.

The oCam viewer doesn't list it as well.

Is there anything that can be done to debug this?

[kikislater]

Plug the board and type in a terminal : dmesg

What is the output in terminal of : lsusb

[nulesus]

Bus 011 Device 003: ID 1f75:0888 Innostor Technology Corporation IS888 SATA Storage Controller Bus 011 Device 002: ID 2109:0811 VIA Labs, Inc. Hub Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 010 Device 004: ID 0e8d:1887 MediaTek Inc. Bus 010 Device 002: ID 2109:0811 VIA Labs, Inc. Hub Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 004: ID 05a4:988b Ortek Technology, Inc. Bus 003 Device 003: ID 0472:0065 Chicony Electronics Co., Ltd PFU-65 Keyboard [Chicony] Bus 003 Device 002: ID 0472:0065 Chicony Electronics Co., Ltd PFU-65 Keyboard [Chicony] Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 003: ID 1c07:0001
Bus 006 Device 002: ID 046d:c24a Logitech, Inc. G600 Gaming Mouse Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[nulesus]

[ 6080.919429] usb 11-2: new SuperSpeed USB device number 4 using xhci_hcd [ 6080.930671] usb 11-2: LPM exit latency is zeroed, disabling LPM. [ 6086.355326] usb 11-2: unable to read config index 0 descriptor/all [ 6086.355341] usb 11-2: can't read configurations, error -110 [ 6086.734007] usb 11-2: new SuperSpeed USB device number 5 using xhci_hcd [ 6086.744959] usb 11-2: LPM exit latency is zeroed, disabling LPM. [ 6092.169971] usb 11-2: unable to read config index 0 descriptor/all [ 6092.169986] usb 11-2: can't read configurations, error -110 [ 6092.548618] usb 11-2: new SuperSpeed USB device number 6 using xhci_hcd [ 6092.559531] usb 11-2: LPM exit latency is zeroed, disabling LPM. [ 6097.984598] usb 11-2: unable to read config index 0 descriptor/all [ 6097.984612] usb 11-2: can't read configurations, error -110 [ 6098.363181] usb 11-2: new SuperSpeed USB device number 7 using xhci_hcd [ 6098.374271] usb 11-2: LPM exit latency is zeroed, disabling LPM. [ 6103.799103] usb 11-2: unable to read config index 0 descriptor/all [ 6103.799109] usb 11-2: can't read configurations, error -110 [ 6103.820237] usb usb11-port2: unable to enumerate USB device [ 6103.820867] xhci_hcd 0000:04:00.0: Stop endpoint command completion for disabled slot 5 [ 6661.397245] r8169 0000:03:00.0 enp3s0: link down [ 6663.411236] r8169 0000:03:00.0 enp3s0: link up [ 6665.179705] r8169 0000:03:00.0 enp3s0: link down [ 6667.199434] r8169 0000:03:00.0 enp3s0: link up [ 6668.964734] r8169 0000:03:00.0 enp3s0: link down [ 6670.968769] r8169 0000:03:00.0 enp3s0: link up [ 6680.139373] r8169 0000:03:00.0 enp3s0: link down [ 6682.118438] r8169 0000:03:00.0 enp3s0: link up [ 6682.849450] r8169 0000:03:00.0 enp3s0: link down [ 6684.781604] r8169 0000:03:00.0 enp3s0: link up [ 6688.579488] r8169 0000:03:00.0 enp3s0: link down [ 6690.594432] r8169 0000:03:00.0 enp3s0: link up [ 6691.538848] r8169 0000:03:00.0 enp3s0: link down [ 6693.498767] r8169 0000:03:00.0 enp3s0: link up [ 6695.336929] r8169 0000:03:00.0 enp3s0: link down [ 6697.277545] r8169 0000:03:00.0 enp3s0: link up [ 6698.500766] r8169 0000:03:00.0 enp3s0: link down [ 6700.510064] r8169 0000:03:00.0 enp3s0: link up [ 7542.759763] usb usb11-port2: config error