search

withrobot / oCam

oCam - USB 3.0 Board Camera
GNU General Public License v3.0
54 stars 61 forks source link

Wrong firmware used upon uptate broke camera #7

Open nickbyd17 opened 7 years ago

nickbyd17 commented 7 years ago

Hi, I am using the oCam-1MGN-U camera and a problem came up after updating the wrong firmware on the camera. The camera is recognized as a different one and does not display any image. The firmware I used is : oCamS-1CGN-U_R1705_170523.img . Now, on windows, in device manager, it's shows a camera named : oCamS-1CGN-U (which is different of oCam-1MGN-U). We followed the instructions once again to update the firmware with the correct file but "UpdateFW" doesn't let us "Erase FW". When we press on "Erase FW" we get the following error : Please reinsert Camera. Therefore I was wondering if there was another possible procedure to erase the firmware on the camera in order to install the correct one. Any update or help would be appreciated. Thanks

CS-WITHROBOT commented 7 years ago

We have uploaded new firmware update software. You can find it at https://github.com/withrobot/oCam/tree/ ... /Update_FW

It will erase whatever firmware you have written on the oCam camera. Please try this.

nickbyd17 commented 6 years ago

It worked! Sorry for the delay, I forgot to answer. Thank you!