search

witnessmenow / ESP32-Cheap-Yellow-Display

Building a community around a cheap ESP32 Display with a touch screen
MIT License
1.79k stars 187 forks source link

3D Stand for CYD request #115

Closed Grey-Lancaster closed 6 months ago

Grey-Lancaster commented 10 months ago

@88markus88 Seems like the only way to contact you is to raise and issue.

This fits perfectly for the new USB C board, https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display/tree/main/3dModels/Markus_CYD_Simple_Case but I prefer a stand like this: https://www.thingiverse.com/thing:4768766

it would require the user to get a 90 degree adapter like this https://www.amazon.com/AreMe-Extender-Compatible-Notebook-Computers/dp/B0B2NJ3P3L

Think you could make that? Thanks, Grey

88markus88 commented 10 months ago

Hi Grey,

I just looked at the stand you pointed to - cool idea! However, that is a completely new design, not a modification of the housing that I have made. You cannot just add feet to the main body of the housing, that would make it difficult to print (lots of overhangs).

I will look into it, and then let you know. Probably on Thingiverse, since I am having trouble to post changes here as Pull Requests ;-)

Best, Markus

Papa Lanc @.***> schrieb am Do., 18. Jan. 2024, 00:49:

@88markus88 https://github.com/88markus88 Seems like the only way to contact you is to raise and issue.

This fits perfectly for the new USB C board, but I prefer a stand like this: https://www.thingiverse.com/thing:4768766

it would require a 90 degree adapter like this

https://www.amazon.com/AreMe-Extender-Compatible-Notebook-Computers/dp/B0B2NJ3P3L

Think you could make that? Thanks, Grey

— Reply to this email directly, view it on GitHub https://github.com/witnessmenow/ESP32-Cheap-Yellow-Display/issues/115, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOKANWW6AEIPP3LZDEJ4OJDYPBPP7AVCNFSM6AAAAABB7LZO32VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DOMRQGQYDINI . You are receiving this because you were mentioned.Message ID: @.***>

Grey-Lancaster commented 10 months ago

Great I was thinking about modifying the top. add an angle foot and printed facedown like the thinverse link. Just leave the back open. But the holes would have to be reconfigured to take the inserts. Probably need to be a bit longer to allow for the 90 degree adapter If you make it drop a note here please. Grey

88markus88 commented 10 months ago

Hi Grey, right, the CYD cannot be attached to the front, it needs the screw inserts in the back. I've just remembered hat I did some feet that can be clipped onto the display in both landscape and portrait mode. I've put the whole thing on Thingiverse, including the feet / holder(you will need two). Please have a look and tell me if this fits your needs. I will probably make a version with included stand anyway, but that will certainly take a while. Markus

Mordevolt commented 10 months ago

just one more 3d printed model: https://www.printables.com/model/645166-esp32-28inch-touch-ips-cyd-lcd-screen-case