Closed dkim777 closed 8 months ago
ets Jul 29 2019 12:21:46
rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1184 load:0x40078000,len:13260 load:0x40080400,len:3028 entry 0x400805e4 E (8) gpio: gpio_set_level(227): GPIO output gpio_num error
Not sure what is up with this. Have you gone through the Troubleshooting steps?
not sure why but above method works, it won't just flash like other esp32 devices.
Got excited about this project and ordered two. Tried the first couple of examples but got following error. any ideas? both are doing same thing on all two of my devices. Thanks
E (157) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0 Rebooting... ets Jul 29 2019 12:21:46
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13964 load:0x40080400,len:3600 entry 0x400805f0 E (134) spi_flash: Detected size(4096k) smaller than the size in the binary image header(16384k). Probe failed.
assert failed: do_core_init startup.c:328 (flash_ret == ESP_OK)