wjzlrong / arducam-osd

Automatically exported from code.google.com/p/arducam-osd
0 stars 0 forks source link

Feature Request: Static Text #24

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago
Need a way to add static text. People using amateur radio to transmit the video 
are required by the FCC to display their call sign at least every ten minute on 
any video signal they are transmitting.

Being able to add a line of static text to the OSD would allow them to do this.

Original issue reported on code.google.com by johnebar...@gmail.com on 28 Jun 2012 at 3:26

GoogleCodeExporter commented 8 years ago
This would be an enhancement, but I don't see anyway to make it anything other 
than a defect. 

Original comment by johnebar...@gmail.com on 28 Jun 2012 at 3:27

GoogleCodeExporter commented 8 years ago

Original comment by sbeni...@gmail.com on 29 Jun 2012 at 9:59

GoogleCodeExporter commented 8 years ago
Being able to achieve regulatory compliance for use with HAM frequencies is a 
very important issue for anyone in the USA flying FPV. Most if not all of the 
available TX frequencies that don't already conflict with our telemetry or 
control frequencies require the use of a HAM operators license and thus in 
order to comply with regulations require your call sign to be broadcast at 
least every 10 minutes.

Original comment by kvca...@gmail.com on 22 Sep 2012 at 3:29

GoogleCodeExporter commented 8 years ago

Original comment by pdrsanto...@gmail.com on 25 Oct 2012 at 9:39

GoogleCodeExporter commented 8 years ago
Hi,

This panel will be in the next release.

Gábor

Original comment by ga...@t-email.hu on 19 Feb 2013 at 3:01

GoogleCodeExporter commented 8 years ago
Isn't this already called 'call-sign' in the current release?

Nathaniel ~KD2DEY

Original comment by kvca...@gmail.com on 19 Feb 2013 at 10:09

GoogleCodeExporter commented 8 years ago
That is in the development version now.

But soon ;)

Original comment by ga...@t-email.hu on 18 Mar 2013 at 3:10

GoogleCodeExporter commented 8 years ago
I found a defect in the HAM callsign field.  ArduCam OSD doesn't allow me to 
enter my callsign.  It says I MUST enter 6 characters...  I only have 4 
characters in my callsign.  I tried using spaces, but it insists I use 6 
characters.   What do I do???

Original comment by cris.sal...@gmail.com on 8 Jun 2013 at 5:12