Fail to decrypt with working and confirmed key, Multical21 on HA

Hi,

First of all, an amazing program, you cooked up here!

I have a Multical21, in Lillestrøm, Norway.

Running the solution on a HA, and fetched the signals via rtl433.

Got the KEM file to decrypt it.

Did run the python script, and got it decrypted. This is also confirmed via: https://wmbusmeters.org/analyze/23442D2C325717751B168D208924E433210FC4FFCCC8A63E0244D0F68DDC64129E89914A:multical21:4354CF9AB41B58D15F90CA5E1BB92E47

What is wrong on my side here?

Decrypt of KEM Found meter MC21 (02140B0G844) number : 75175732 serial : 75175732 type : VolumeCold driver : multical21 config : 0100200023533 key : 4354CF9AB41B58D15F90CA5E1BB92E47 meter file: home/pi/GIT/wmbusmeters/etc/wmbusmeters.d/75175732

Snip from log file with same ID, inside HA Received telegram from: 75175732 manufacturer: (KAM) Kamstrup Energi (0x2c2d) type: Cold water meter (0x16) encrypted ver: 0x1b device: rtl433[00000001] rssi: 999 dBm driver: multical21 (wmbus) 000 : 23 length (35 bytes) (wmbus) 001 : 44 dll-c (from meter SND_NR) (wmbus) 002 : 2d2c dll-mfct (KAM) (wmbus) 004 : 32571775 dll-id (75175732) (wmbus) 008 : 1b dll-version (wmbus) 009 : 16 dll-type (Cold water meter) (wmbus) 010 : 8d ell-ci-field (ELL: Extended Link Layer II (8 Byte)) (wmbus) 011 : 20 ell-cc (slow_resp sync) (wmbus) 012 : 96 ell-acc (wmbus) 013 : 68e53321 sn (AES_CTR) (wmbus) 017 : e635 payload crc (calculated ac84 ERROR) (wmbus) 019 CE: 76F0826C3671EBD70A20F49A246868F90B failed decryption. Wrong key? telegram=|_23442D2C325717751B168D209668E53321E63576F0826C3671EBD70A20F49A246868F90B|+104 (wmbus) telegram from 75175732 ignored by all configured meters!`

The config is: `data_path: /etc/wmbusmeters enable_mqtt_discovery: true conf: |- loglevel=debug device= rtl433:t1,c1 logtelegrams=true format=json logfile=/dev/stdout shell=/wmbusmeters/mosquitto_pub.sh wmbusmeters/$METER_NAME "$METER_JSON" meters:

name=MainWater driver=auto id=75175732 key=4354CF9AB41B58D15F90CA5E1BB92E47 mqtt: host: 10.0.0.90 port: 1883 user: wmbusmeters password: **

Then the log from the HA addon: s6-rc: info: service s6rc-oneshot-runner: starting s6-rc: info: service s6rc-oneshot-runner successfully started s6-rc: info: service fix-attrs: starting s6-rc: info: service fix-attrs successfully started s6-rc: info: service legacy-cont-init: starting s6-rc: info: service legacy-cont-init successfully started s6-rc: info: service legacy-services: starting s6-rc: info: service legacy-services successfully started [14:56:23] INFO: Syncing wmbusmeters configuration ... [14:56:23] INFO: Registering meters ... [14:56:23] INFO: Adding meter-0001 ... [14:56:23] INFO: Generating MQTT configuration ... [14:56:25] INFO: Broker 10.0.0.90 will be used. MQTT Discovery ... Adding meter: MainWater id ... MQTT Discovery cleanup... [14:56:28] INFO: Running wmbusmeters ... (config) "device" "rtl433:c1"

And, if a smarter person out there can point out why it does not post to MQTT, please help me. I have tested with both the {} and config....

From the logs when the addon starts, it looks like it does not fetch the meters

Logfile: <<< (serial) EVENT thread interrupted (shell) return code 1 (shell) 196 exited (main) rtl_srd found in path (shell) exec (capture output) "/bin/sh" (shell) arg "-c" (shell) arg "rtl_wmbus < /dev/null" (shell) output: >>><<< (serial) EVENT thread interrupted (shell) return code 0 (shell) 197 exited (main) rtl_wmbus found in path (main) rtlsdr device 00000001 not currently used. (main) found specified device (rtl433:c1) that matches detected device (:rtl433[00000001]:0/0) (main) opening rtl433:c1 Started config rtl433[00000001] listening on c1 (rtl433) using command: /usr/bin/rtl_433 -d 0 -F csv -f 868.95M (bgshell) exec background "/bin/sh" (serial) EVENT thread interrupted (bgshell) arg "-c" (bgshell) arg "/usr/bin/rtl_433 -d 0 -F csv -f 868.95M" (serialcmd) opened /bin/sh pid 202 fd 5 (rtl433) (main) regular reset of rtl433 will happen every 82800 seconds (wmbus) no alarm (expected activity) for rtl433 (serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds No meters configured. Printing id:s of all telegrams heard! (serial) waiting for stop (serial) received ascii "rtl_433 version 22.11-34-gb605a3d2 branch master at 202212302231 inputs file rtl_tcp RTL-SDR<0A>Use -h for usage help and see https://triq.org/ for documentation.<0A>Trying conf file at "rtl_433.conf"...<0A>Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "rtl_433 version 22.11-34-gb605a3d2 branch master at 202212302231 inputs file rtl_tcp RTL-SDR<0A>Use -h for usage help and see https://triq.org/ for documentation.<0A>Trying conf file at "rtl_433.conf"...<0A>Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Use -h for usage help and see https://triq.org/ for documentation.<0A>Trying conf file at "rtl_433.conf"...<0A>Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Trying conf file at "rtl_433.conf"...<0A>Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...<0A>Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Trying conf file at "/etc/rtl_433/rtl_433.conf"...<0A><0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "<0A>New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "New defaults active, use "-Y classic -s 250k" for the old defaults!<0A><0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "<0A>Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Use "-F log" if you want any messages, warnings, and errors in the console.<0A>time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "time,msg,codes,model,button,id,channel,battery_ok,temperature_C,mic,subtype,humidity,state,status,rain_rate,rain_rate_mm_h,rain_rate_in_h,rain_total,rain_mm,rain_in,gust,average,direction,wind_max_m_s,wind_avg_m_s,wind_dir_deg,pressure_hPa,uv,power_W,energy_kWh,radio_clock,sequence,unit,group_call,command,dim,dim_value,dipswitch,rbutton,temperature_F,data,closed,event,tamper,esn,exception,status_hex,xactivity,xtamper1,xtamper2,setpoint_C,switch,cmd,cmd_id,tristate,wind_avg_km_h,wind_max_km_h,signal,sensor_code,uv_sensor_id,uv_status,uv_index,lux,wm,seq,current,interval,learn,message_type,sequence_num,leak_detected,wind_avg_mi_h,storm_dist,strike_count,strike_distance,active,raw_msg,rfi,wind_max_mi_h,wind_approach,flags,maybetemp,binding_countdown,depth_cm,power0_W,power1_W,power2_W,power0,node,ct1,ct2,ct3,ct4,batt_Vrms,temp1_C,temp2_C,temp3_C,temp4_C,temp5_C,temp6_C,pulse,button1,button2,button3,button4,group,transmit,moisture,type,pressure_PSI,battery_mV,pressure_kPa,pulses,pulsecount,len,to,from,payload,motion,opened,water,contact_open,reed_open,alarm,heartbeat,temperature_1_C,temperature_2_C,test,humidity_1,newbattery,heating,heating_temp,uvi,light_lux,pm2_5_ug_m3,estimated_pm10_0_ug_m3,counter,code,repeat,maybe_battery,moving,unknown,unknown_3,delay,raw_message,switch1,switch2,switch3,switch4,switch5,extradata,house_id,module_id,sensor_type,sensor_count,alarms,sensor_value,mode,version,type_string,CI,AC,ST,CW,sn,knx_ctrl,src,dst,l_npci,tpci,apci,crc,M,C,data_length,average_temperature_1h_C,average_temperature_24h_C,average_humidity_1h,average_humidity_24h,minimum_temperature_1h_C,maximum_temperature_1h_C,minimum_temperature_24h_C,maximum_temperature_24h_C,minimum_humidity_1h,maximum_humidity_1h,minimum_humidity_24h,maximum_humidity_24h,counter_0,counter_1,failed,battery,alert,secret_knock,relay,message_num,wind_dev_deg,exposure_mins,transmit_s,button_id,button_name,pulses_per_kwh,cumulative_kWh,effect,encrypted,current_A,voltage_V,pairing,connected,gap,impulses,triggered,storage,boost,ad_raw,power_idx,power_max,timestamp,rain,physical_tamper,ert_type,encoder_tamper,consumption_data,else,restore,supervised,spidernet,repeater,ProtocolID,EndpointType,EndpointID,Consumption,Tamper,PacketCRC,MeterType,from_id,to_id,msg_type,msg_type_str,extended,hops_max,hops_left,formatted,cmd_dat,msg_str,hopsmax,hopsleft,PacketTypeID,PacketLength,HammingCode,ApplicationVersion,ERTType,ERTSerialNumber,ConsumptionIntervalCount,ModuleProgrammingState,Unknown_field_1,LastGenerationCount,Unknown_field_2,TamperCounters,AsynchronousCounters,PowerOutageFlags,LastConsumptionCount,DifferentialConsumptionIntervals,TransmitTimeOffset,MeterIdCRC,rolling,fixed,remote_id,sendmode,control,retransmission,rain1,rain2,startup,light_klx,message_subtype,raw,rain2_mm,temperature_alarm,timer,timer_active,timer_alarm,meat,taste,id0,id1,switch_id,pad_id,pin,net_id,message,text,ids,time_request,flame_status,zone,setpoint,cycle_rate,minimum_on_time,minimum_off_time,proportional_band_width,device_number,failsafe_mode,ticker,heat_demand,boiler_modulation_level,datetime,domain_id,demand,zone_idx,max_flow_temp,pump_run_time,actuator_run_time,min_flow_temp,token,cmd_name,cmd_value,dst_id,mac,storm_dist_km,current_1_A,current_2_A,current_3_A,sensor_num,temperature2_C,sync,temperature_1_F,temperature_2_F,facility,wheel,action,longpress,pressure,humidity_2,rain_raw,pilot,light,thermostat,power,front,fan,aux,flame,battery_level,ctr,cmac,encr,stype,value,centrifugal_acc,has_tick,tick,pm10_0_ug_m3,co2_ppm,ext_power,flags_1,volume_gal,flags_2<0A>Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Detached kernel driver<0A>Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Found Rafael Micro R828D tuner<0A>Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "Exact sample rate is: 1000000.026491 Hz<0A>[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>" (rtl433) checkRTL433Frame "[R82XX] PLL not locked!<0A>Allocating 15 zero-copy buffers<0A>"

wmbusmeters / wmbusmeters

Fail to decrypt with working and confirmed key, Multical21 on HA #776