./build.sh: line 85: cargo: command not found

[Melchior1410]

Hello, I always get the error when running:

Note: switching to 'ce6def219262b5c1f6dbe5440f9f90038bafb3d8'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at ce6def2 bump version to 0.9.7-1 Cloning into 'perlmod'... remote: Enumerating objects: 1441, done. remote: Total 1441 (delta 0), reused 0 (delta 0), pack-reused 1441 Receiving objects: 100% (1441/1441), 238.19 KiB | 3.35 MiB/s, done. Resolving deltas: 100% (980/980), done. HEAD is now at f8b49fc clippy fixups fatal: reference is not a tree: 9488180f9ef3bf57e049b645c001c3df9b65e11c patching file .cargo/config patching file Makefile patching file pmg-rs/Cargo.toml patching file pmg-rs/debian/control patching file pve-rs/Cargo.toml patching file pve-rs/debian/control patching file proxmox-apt/Cargo.toml patching file proxmox-openid-rs/Cargo.toml ./build.sh: line 85: cargo: command not found

What am I doing wrong?

[wofferl]

You are missing the rust binaries. Did you follow the steps in the Readme before starting the build script?

Install build essentials and dependencies

apt-get -y install \ build-essential curl sudo git lintian \ pkg-config libudev-dev libssl-dev libapt-pkg-dev libclang-dev \ libnetaddr-ip-perl libpam0g-dev libcurl4-openssl-dev

Install rustup

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs -sSf | sh -s source ~/.cargo/env

[Melchior1410]

Yes, I followed everything as described.

pi@pbs:~/proxmox-backup-arm64 $ sudo apt-get -y install build-essential curl sudo git lintian pkg-config libudev-dev libssl-dev libapt-pkg-dev libclang-dev libnetaddr-ip-perl libpam0g-dev libcurl4-openssl-dev Reading package lists... Done Building dependency tree... Done Reading state information... Done libapt-pkg-dev is already the newest version (2.2.4). build-essential is already the newest version (12.9). curl is already the newest version (7.74.0-1.3+deb11u3). libcurl4-openssl-dev is already the newest version (7.74.0-1.3+deb11u3). git is already the newest version (1:2.30.2-1). libnetaddr-ip-perl is already the newest version (4.079+dfsg-1+b5). lintian is already the newest version (2.104.0). libclang-dev is already the newest version (1:11.0-51+nmu5). pkg-config is already the newest version (0.29.2-1). sudo is already the newest version (1.9.5p2-3). libudev-dev is already the newest version (247.3-7+deb11u1). libpam0g-dev is already the newest version (1.4.0-9+deb11u1+rpt2). libssl-dev is already the newest version (1.1.1n-0+deb11u3+rpt1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. pi@pbs:~/proxmox-backup-arm64 $ curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs -sSf | sh -s source ~/.cargo/env info: downloading installer

Welcome to Rust!

This will download and install the official compiler for the Rust programming language, and its package manager, Cargo.

Rustup metadata and toolchains will be installed into the Rustup home directory, located at:

/home/pi/.rustup

This can be modified with the RUSTUP_HOME environment variable.

The Cargo home directory is located at:

/home/pi/.cargo

This can be modified with the CARGO_HOME environment variable.

The cargo, rustc, rustup and other commands will be added to Cargo's bin directory, located at:

/home/pi/.cargo/bin

This path will then be added to your PATH environment variable by modifying the profile files located at:

/home/pi/.profile /home/pi/.bashrc

You can uninstall at any time with rustup self uninstall and these changes will be reverted.

Current installation options:

default host triple: aarch64-unknown-linux-gnu default toolchain: stable (default) profile: default modify PATH variable: yes

1) Proceed with installation (default) 2) Customize installation 3) Cancel installation

1

info: profile set to 'default' info: default host triple is aarch64-unknown-linux-gnu warning: Updating existing toolchain, profile choice will be ignored info: syncing channel updates for 'stable-aarch64-unknown-linux-gnu' info: default toolchain set to 'stable-aarch64-unknown-linux-gnu'

stable-aarch64-unknown-linux-gnu unchanged - rustc 1.65.0 (897e37553 2022-11-02)

Rust is installed now. Great!

To get started you may need to restart your current shell. This would reload your PATH environment variable to include Cargo's bin directory ($HOME/.cargo/bin).

To configure your current shell, run: source "$HOME/.cargo/env" pi@pbs:~/proxmox-backup-arm64 $ sudo ./build.sh pve-eslint up-to-date dpkg-query: no packages found matching libproxmox-rs-perl Removing perlmod/ Removing proxmox-acme-rs/ Removing proxmox-apt/ Removing proxmox-openid-rs/ Removing proxmox/ HEAD is now at 9488180 pmg-rs: bump to 0.6.2 HEAD is now at 9488180 pmg-rs: bump to 0.6.2 Cloning into 'proxmox'... remote: Enumerating objects: 11488, done. remote: Total 11488 (delta 0), reused 0 (delta 0), pack-reused 11488 Receiving objects: 100% (11488/11488), 1.84 MiB | 8.07 MiB/s, done. Resolving deltas: 100% (6727/6727), done. HEAD is now at 208d4ff bump proxmox-section-config to 1.0.1-1 Note: switching to '2ae95b5f4e9870113dab8fea1df631299559d4a4'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 2ae95b5 metrics: bump to 0.2.1 Cloning into 'proxmox-acme-rs'... remote: Enumerating objects: 250, done. remote: Total 250 (delta 0), reused 0 (delta 0), pack-reused 250 Receiving objects: 100% (250/250), 48.31 KiB | 1.46 MiB/s, done. Resolving deltas: 100% (164/164), done. HEAD is now at ff3fceb jws: allocate exact capacity Note: switching to 'abc0bdd09d5c3501534510d49da0ae8fa5c05c05'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at abc0bdd bump version to 0.4.0 Cloning into 'proxmox-apt'... remote: Enumerating objects: 443, done. remote: Total 443 (delta 0), reused 0 (delta 0), pack-reused 443 Receiving objects: 100% (443/443), 11.21 MiB | 9.07 MiB/s, done. Resolving deltas: 100% (275/275), done. HEAD is now at 8a7a719 bump version to 0.9.3-1 Note: switching to '6c0c48b97a29cac1519402e4a1c77010e8a5d216'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at 6c0c48b bump version to 0.9.2-1 Cloning into 'proxmox-openid-rs'... remote: Enumerating objects: 238, done. remote: Total 238 (delta 0), reused 0 (delta 0), pack-reused 238 Receiving objects: 100% (238/238), 32.26 KiB | 1.08 MiB/s, done. Resolving deltas: 100% (124/124), done. HEAD is now at ce6def2 bump version to 0.9.7-1 Note: switching to 'ce6def219262b5c1f6dbe5440f9f90038bafb3d8'.

You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example:

git switch -c

Or undo this operation with:

git switch -

Turn off this advice by setting config variable advice.detachedHead to false

HEAD is now at ce6def2 bump version to 0.9.7-1 Cloning into 'perlmod'... remote: Enumerating objects: 1441, done. remote: Total 1441 (delta 0), reused 0 (delta 0), pack-reused 1441 Receiving objects: 100% (1441/1441), 238.19 KiB | 4.18 MiB/s, done. Resolving deltas: 100% (980/980), done. HEAD is now at f8b49fc clippy fixups fatal: reference is not a tree: 9488180f9ef3bf57e049b645c001c3df9b65e11c patching file .cargo/config patching file Makefile patching file pmg-rs/Cargo.toml patching file pmg-rs/debian/control patching file pve-rs/Cargo.toml patching file pve-rs/debian/control patching file proxmox-apt/Cargo.toml patching file proxmox-openid-rs/Cargo.toml ./build.sh: line 85: cargo: command not found pi@pbs:~/proxmox-backup-arm64 $

[wofferl]

After installing rustup the cargo binary should be located in ~/.cargo/bin/ It is necessary that this Path is in your PATH environment, which is done, by sourcing ~/cargo/env.

Can you check your PATH and the cargo bin library, if all is in place?

[Melchior1410]

I'm a little further now. User rights were incorrect. Now a new problem:

HEAD is now at ce6def2 bump version to 0.9.7-1 Cloning into 'perlmod'... remote: Enumerating objects: 1441, done. remote: Total 1441 (delta 0), reused 0 (delta 0), pack-reused 1441 Receiving objects: 100% (1441/1441), 238.19 KiB | 3.26 MiB/s, done. Resolving deltas: 100% (980/980), done. HEAD is now at f8b49fc clippy fixups fatal: reference is not a tree: 9488180f9ef3bf57e049b645c001c3df9b65e11c patching file .cargo/config patching file Makefile patching file pmg-rs/Cargo.toml patching file pmg-rs/debian/control patching file pve-rs/Cargo.toml patching file pve-rs/debian/control patching file proxmox-apt/Cargo.toml patching file proxmox-openid-rs/Cargo.toml error: failed to load manifest for workspace member /proxmox-backup-arm64/sources/proxmox-perl-rs/pve-rs

Caused by: failed to load manifest for dependency perlmod

Caused by: failed to read /proxmox-backup-arm64/sources/perlmod/perlmod/Cargo.toml

Caused by: No such file or directory (os error 2)

[wofferl]

Sorry, there were problems with the dependency paths. Please check out the new patch.