search

wyolum / mmM

mmMercury is an Open Hardware, blood pressure measurement device (not FDA approved).
2 stars 0 forks source link

Need enclosure design #3

Open osbock opened 8 years ago

Anool commented 8 years ago

I started working on a case design for mmM.

Got the base done. See attached image. Next up is the top cover with various cutouts. I've checked it in to the repo. Freecad file under the Fabricate directory.

Best Regards,

Anool Mahidharia Work http://www.lumetron.com/ DiY http://www.wyolum.com/ Hackaday http://hackaday.com/about/ HackerSpace http://www.makersasylum.com Git https://github.com/anool Cycling http://cyclists.in/profile/AnoolJM Workouts http://www.dailymile.com/people/anool Flickr http://www.flickr.com/photos/anool Picasa http://picasaweb.google.com/anool.m

On Tue, Feb 16, 2016 at 4:11 AM, Kevin Osborn notifications@github.com wrote:

— Reply to this email directly or view it on GitHub https://github.com/wyolum/mmM/issues/3.

osbock commented 8 years ago

Excellent! Make sure there is room under the pump mount for socket head cap screw heads. Planning to get the right length screws and use m3 locknuts on top.

On Wed, Feb 17, 2016 at 1:30 PM, Anool Mahidharia notifications@github.com wrote:

I started working on a case design for mmM.

Got the base done. See attached image. Next up is the top cover with various cutouts. I've checked it in to the repo. Freecad file under the Fabricate directory.

Best Regards,

Anool Mahidharia Work http://www.lumetron.com/ DiY http://www.wyolum.com/ Hackaday http://hackaday.com/about/ HackerSpace http://www.makersasylum.com Git https://github.com/anool Cycling http://cyclists.in/profile/AnoolJM Workouts http://www.dailymile.com/people/anool Flickr http://www.flickr.com/photos/anool Picasa http://picasaweb.google.com/anool.m

On Tue, Feb 16, 2016 at 4:11 AM, Kevin Osborn notifications@github.com wrote:

— Reply to this email directly or view it on GitHub https://github.com/wyolum/mmM/issues/3.

— Reply to this email directly or view it on GitHub https://github.com/wyolum/mmM/issues/3#issuecomment-185339278.

osbock commented 8 years ago

Also, mine came with a straight header for FTDI. it would probably be better if it stuck out the side. I'll desolder and put in a right angle.

osbock commented 8 years ago

Another point: the pump end of the case needs a little clearance for tubing, as the barbs for the pressure sensor and the pump come right to the board edge.