Less frequent Info messages

[Flux3PO]

Hi, when I connect the box to Z2M it all works fine so far but the device is flooding the Network with Info Messages.

Is there a way to reduce the Ammount of messages and contacts to the Network ?

[wzwenzhi]

Hello, there is some information that requires real-time feedback. Our current setting is to provide feedback every 1 second. We would like to know your suggestion and how many seconds would be more appropriate to change it to.

------------------ 原始邮件 ------------------ 发件人: "wzwenzhi/Wenzhi-ZigBee2mqtt" @.>; 发送时间: 2023年10月12日(星期四) 凌晨3:04 @.>; @.***>; 主题: [wzwenzhi/Wenzhi-ZigBee2mqtt] Less frequent Info messages (Issue #1)

Hi, when I connect the box to Z2M it all works fine so far but the device is flooding the Network with Info Messages.

Is there a way to reduce the Ammount of messages and contacts to the Network ?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>

[Flux3PO]

Hi Ideally this would be adjustable. Once a Minute or every 30s should be fine. I'm just a bit worried that every seconds floods the Network with a lot of useless infromation. Most people would not need to not in the same second when the person leaves the room. A adjustable delay should be fine.

[kkossev]

Hello, there is some information that requires real-time feedback. Our current setting is to provide feedback every 1 second

@wzwenzhi 99 out of 100 users do not need the distance reports; they are not used in any automations. Please provide an option (Tuya Data Point) to completely disable sending the distance reports to the Zigbee coordinator.

[Flux3PO]

Hello, there is some information that requires real-time feedback. Our current setting is to provide feedback every 1 second

@wzwenzhi 99 out of 100 users do not need the distance reports; they are not used in any automations. Please provide an option (Tuya Data Point) to completely disable sending the distance reports to the Zigbee coordinator.

I fully support this

[wzwenzhi]

Thank you very much for your suggestion. We are currently working on this, and our new product will provide a feature to set the reporting frequency.

------------------ 原始邮件 ------------------ 发件人: "wzwenzhi/Wenzhi-ZigBee2mqtt" @.>; 发送时间: 2024年4月25日(星期四) 凌晨3:34 @.>; @.**@.>; 主题: Re: [wzwenzhi/Wenzhi-ZigBee2mqtt] Less frequent Info messages (Issue #1)

Hello, there is some information that requires real-time feedback. Our current setting is to provide feedback every 1 second

@wzwenzhi 99 out of 100 users do not need the distance reports; they are not used in any automations. Please provide an option (Tuya Data Point) to completely disable sending the distance reports to the Zigbee coordinator.

I fully support this

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>

[kingunlim]

Thank you very much for your suggestion. We are currently working on this, and our new product will provide a feature to set the reporting frequency.

------------------ 原始邮件 ------------------

发件人: "wzwenzhi/Wenzhi-ZigBee2mqtt" @.***>;

发送时间: 2024年4月25日(星期四) 凌晨3:34

@.***>;

@.**@.>;

主题: Re: [wzwenzhi/Wenzhi-ZigBee2mqtt] Less frequent Info messages (Issue #1)

Hello, there is some information that requires real-time feedback. Our current setting is to provide feedback every 1 second

@wzwenzhi 99 out of 100 users do not need the distance reports; they are not used in any automations. Please provide an option (Tuya Data Point) to completely disable sending the distance reports to the Zigbee coordinator.

I fully support this

—

Reply to this email directly, view it on GitHub, or unsubscribe.

You are receiving this because you were mentioned.Message ID: @.***>

what does that mean? this is a fw problem and not a hardware problem?! you already told us there will be a new fw, why are talking about a new product that supports that now? i have 6 devices that i cant use because of the reporting issue, that floods my hole zigbee network. i dont know how this critical problem is still not fixed 😣

[kingunlim]

any update?

[Flux3PO]

any update?

"New Product" means "it won't be fixed for us"

[kingunlim]

@wzwenzhi can you give a update on the situation to us????

[kkossev]

It seems that WENZHI does not have full control of the firmware of the Zigbee devices that they sell.

We may have a better chance to receive an answer posting here : https://www.tuyaos.com/viewforum.php?f=22