Open daiaji opened 1 year ago
大哥有相关经验吗？ UART终端似乎无法输入，我只能从魔改编程器固件开始了。 但firmware-mod-kit似乎不太好使。 修改squashfs然后打包该怎么搞？
binwalk ~/FW/EG105G_V2.bin DECIMAL HEXADECIMAL DESCRIPTION -------------------------------------------------------------------------------- 87320 0x15518 Neighborly text, "neighbor_add_server_ipent" 87344 0x15530 Neighborly text, "neighbor_setup_ip_range" 87360 0x15540 Neighborly text, "neighbor_get_ip_for_clientghbor_get_firmware_name" 87388 0x1555C Neighborly text, "neighbor_get_server_ip_rangeghbor_try_tftp_with_ip" 87420 0x1557C Neighborly text, "neighbor_get_firmware_name" 87448 0x15598 Neighborly text, "neighbor_try_tftp_with_ip failed ***" 100071 0x186E7 Neighborly text, "neighbor_get_local_ip dhcp failed autoload" 100687 0x1894F Neighborly text, "neighbor_add_server_ip failed, total num : %d num is limit %d" 100791 0x189B7 Neighborly text, "neighbor_add_server_ip failed, mamloc size %d failedM-RECOVERY] debug <%s line:%-4d> add server ip failed, ip %s, ret %d" 101203 0x18B53 Neighborly text, "neighbor_setup is already running, exitM-RECOVERY] debug <%s line:%-4d> get local ip failed, ret is %d" 101937 0x18E31 Neighborly text, "neighbor discovery with dhcptory mode" 524288 0x80000 uImage header, header size: 64 bytes, header CRC: 0x9FA41B34, created: 2023-10-12 15:45:04, image size: 1549230 bytes, Data Address: 0x81001000, Entry Point: 0x81001000, data CRC: 0x2B217037, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: "OpenWrt Linux-3.10.14-169495" 524352 0x80040 LZMA compressed data, properties: 0x6D, dictionary size: 8388608 bytes, uncompressed size: 4602432 bytes 2073582 0x1FA3EE Squashfs filesystem, little endian, version 4.0, compression:xz, size: 12580025 bytes, 3925 inodes, blocksize: 262144 bytes, created: 2023-10-12 15:45:02 14680064 0xE00000 JFFS2 filesystem, little endian
EG105G_V2.bin.tar.gz TL-R483G_1.bin.tar.gz
何必折腾它呢，买个别的容易刷的不好吗
ptpt52
commented
11 months ago ptpt52
commented
11 months ago
大哥有相关经验吗？ UART终端似乎无法输入，我只能从魔改编程器固件开始了。 但firmware-mod-kit似乎不太好使。 修改squashfs然后打包该怎么搞？
EG105G_V2.bin.tar.gz TL-R483G_1.bin.tar.gz