Closed pfeatherstone closed 4 years ago
No, I am afraid. BeamformIt is topology agnostic and is used to produce a good single channel audio, not for source separation.
On Tue, 25 Aug 2020 at 09:55, pfeatherstone notifications@github.com wrote:
I have a https://wiki.seeedstudio.com/ReSpeaker_Mic_Array_v2.0/ microphone array. Is it possible, using this repository, given the microphone array topology, to spatially filter the audio channels in a particular direction?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/xanguera/BeamformIt/issues/25, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACITV7HINR6SUQ56IMKYYXLSCN4B7ANCNFSM4QKM25ZA .
Thank you.
@xanguera do you know of a good way to do source separation, preferably in C or C++? There is https://github.com/introlab/odas but it's not very easy or predictable to use.
No, I am sorry.
On Tue, Aug 25, 2020, 10:53 AM pfeatherstone notifications@github.com wrote:
@xanguera https://github.com/xanguera do you know of a good way to do source separation, preferably in C or C++? There is https://github.com/introlab/odas but it's not very easy or predictable to use.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/xanguera/BeamformIt/issues/25#issuecomment-679926130, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACITV7CLVYB62N24QPII2YLSCOCYTANCNFSM4QKM25ZA .
I have a https://wiki.seeedstudio.com/ReSpeaker_Mic_Array_v2.0/ microphone array. Is it possible, using this repository, given the microphone array topology, to spatially filter the audio channels in a particular direction?