Closed isslam95 closed 2 years ago
i keep getting (no free ipv4)
what i did i added this address to lo interface 100.64.0.1 with this command ip addr add 100.64.0.1dev lo and then route add -host 100.64.0.1 dev lo and i created this config file with this parameters
[modules] log_file pppoe auth_pap chap-secrets ippool shaper [core] log-error=/var/log/accel-ppp/core.log thread-count=4 [ppp] verbose=1 min-mtu=1365 mtu=1372 mru=1368 ipv4=require ipv6=deny lcp-echo-interval=20 lcp-echo-timeout=120 [pppoe] verbose=1 ip-pool=pool_pppoe interface=enp0s25 [dns] dns1=8.8.8.8 [ip-pool] gw-ip-address=100.64.0.1 100.64.0.0/24,name=pool_pppoe [log] log-file=/var/log/accel-ppp/accel-ppp.log log-emerg=/var/log/accel-ppp/emerg.log log-fail-file=/var/log/accel-ppp/auth-fail.log copy=1 level=5 [chap-secrets] gw-ip-address=100.64.0.1 chap-secrets=/etc/chap-secrets [shaper] up-limiter=police down-limiter=tbf verbose=1 [cli] verbose=1 telnet=127.0.0.1:2000 tcp=127.0.0.1:2001
and the output of /var/log/accel-ppp/accel-ppp.log
2021-11-25 01:46:59]: debug: enp0s25: lcp_layer_init [2021-11-25 01:46:59]: debug: enp0s25: auth_layer_init [2021-11-25 01:46:59]: debug: enp0s25: ccp_layer_init [2021-11-25 01:46:59]: debug: enp0s25: ipcp_layer_init [2021-11-25 01:46:59]: debug: enp0s25: ipv6cp_layer_init [2021-11-25 01:46:59]: debug: enp0s25: ppp establishing [2021-11-25 01:46:59]: debug: enp0s25: lcp_layer_start [2021-11-25 01:46:59]: info: enp0s25: send [LCP ConfReq id=ec <auth PAP> <mru 1368> <magic 02c8031f>] [2021-11-25 01:46:59]: info: enp0s25: recv [LCP ConfReq id=1 <mru 1492> <magic 8a06f61a>] [2021-11-25 01:46:59]: info: enp0s25: send [LCP ConfAck id=1] [2021-11-25 01:46:59]: info: enp0s25: recv [LCP ConfAck id=ec <auth PAP> <mru 1368> <magic 02c8031f>] [2021-11-25 01:46:59]: debug: enp0s25: lcp_layer_started [2021-11-25 01:46:59]: debug: enp0s25: auth_layer_start [2021-11-25 01:46:59]: debug: enp0s25: recv [LCP EchoReq id=0 <magic 8a06f61a>] [2021-11-25 01:46:59]: debug: enp0s25: send [LCP EchoRep id=0 <magic 02c8031f>] [2021-11-25 01:46:59]: info: enp0s25: recv [PAP AuthReq id=1] [2021-11-25 01:46:59]: info: ppp1: connect: ppp1 <--> pppoe(08:00:27:e8:a0:8f) [2021-11-25 01:46:59]: debug: ppp1: ppp connected [2021-11-25 01:46:59]: info: ppp1: send [PAP AuthAck id=1 "Authentication succeeded"] [2021-11-25 01:46:59]: info: ppp1: isso: authentication succeeded [2021-11-25 01:46:59]: debug: ppp1: auth_layer_started [2021-11-25 01:46:59]: debug: ppp1: ccp_layer_start [2021-11-25 01:46:59]: debug: ppp1: ipcp_layer_start [2021-11-25 01:46:59]: warn: ppp1: ppp: no free IPv4 address [2021-11-25 01:46:59]: debug: ppp1: terminate [2021-11-25 01:46:59]: debug: ppp1: lcp_layer_finish [2021-11-25 01:46:59]: info: ppp1: send [LCP TermReq id=238] [2021-11-25 01:46:59]: debug: ppp1: auth_layer_finish [2021-11-25 01:46:59]: debug: ppp1: auth_layer_finished [2021-11-25 01:46:59]: debug: ppp1: ccp_layer_finish [2021-11-25 01:46:59]: debug: ppp1: ccp_layer_finished [2021-11-25 01:46:59]: debug: ppp1: ipcp_layer_finish [2021-11-25 01:46:59]: debug: ppp1: ipcp_layer_finished [2021-11-25 01:46:59]: warn: ppp1: IPCP: discarding packet [2021-11-25 01:46:59]: warn: ppp1: IPV6CP: discarding packet [2021-11-25 01:46:59]: info: ppp1: recv [LCP TermAck id=ee] [2021-11-25 01:46:59]: debug: ppp1: lcp_layer_finished [2021-11-25 01:46:59]: debug: ppp1: pppoe: ppp finished [2021-11-25 01:46:59]: debug: ppp1: lcp_layer_free [2021-11-25 01:46:59]: debug: ppp1: auth_layer_free [2021-11-25 01:46:59]: debug: ppp1: ccp_layer_free [2021-11-25 01:46:59]: debug: ppp1: ipcp_layer_free [2021-11-25 01:46:59]: debug: ppp1: ipv6cp_layer_free [2021-11-25 01:46:59]: debug: ppp1: ppp destablished [2021-11-25 01:46:59]: info: enp0s25: send [PPPoE PADT 84:2b:2b:a9:6e:5e => 08:00:27:e8:a0:8f sid=4d80 <AC-Name accel-ppp> <Service-Name >] [2021-11-25 01:46:59]: info: ppp1: disconnected [2021-11-25 01:46:59]: info: enp0s25: recv [PPPoE PADI 08:00:27:e8:a0:8f => ff:ff:ff:ff:ff:ff sid=0000 <Service-Name > <Host-Uniq 703c0000>] [2021-11-25 01:46:59]: info: enp0s25: send [PPPoE PADO 84:2b:2b:a9:6e:5e => 08:00:27:e8:a0:8f sid=0000 <AC-Name accel-ppp> <Service-Name > <AC-Cookie 0e0c35860c881e1baabe0b35e43be3bfd6bc846a4216f56e> <Host-Uniq 703c0000>] [2021-11-25 01:46:59]: info: enp0s25: recv [PPPoE PADR 08:00:27:e8:a0:8f => 84:2b:2b:a9:6e:5e sid=0000 <Service-Name > <Host-Uniq 703c0000> <AC-Cookie 0e0c35860c881e1baabe0b35e43be3bfd6bc846a4216f56e>] [2021-11-25 01:46:59]: info: enp0s25: send [PPPoE PADS 84:2b:2b:a9:6e:5e => 08:00:27:e8:a0:8f sid=4dc0 <AC-Name accel-ppp> <Service-Name > <Host-Uniq 703c0000>] [2021-11-25 01:46:59]: debug: enp0s25: lcp_layer_init [2021-11-25 01:46:59]: debug: enp0s25: auth_layer_init [2021-11-25 01:46:59]: debug: enp0s25: ccp_layer_init
try to use non-named pool -100.64.0.0/24,name=pool_pppoe +100.64.0.0/24
still doesn't work
I FINALLY figure out It was /etc/cheap-secrets file i forgot to put * on ip address section thanks for help
i keep getting (no free ipv4)
what i did i added this address to lo interface 100.64.0.1 with this command ip addr add 100.64.0.1dev lo and then route add -host 100.64.0.1 dev lo and i created this config file with this parameters
and the output of /var/log/accel-ppp/accel-ppp.log