Open GoogleCodeExporter opened 9 years ago
PS: after update, click "connect openwrt/linux" no response
Original comment by dadof...@gmail.com
on 16 Feb 2014 at 12:49
I have the same issue. Tried to update the router to the latest ddserver
version and now I get the IO error not found.
Original comment by kenwishn...@gmail.com
on 16 Feb 2014 at 9:11
try open cv neon.
Original comment by artisdar...@gmail.com
on 17 Feb 2014 at 10:15
A new version for OpenWRT (v ....0.12.bin ) as well DslrDashboard V0.30.33.apk
New files can be found here:
https://drive.google.com/folderview?id=0BxMZ8XY3H2wiNmtrS0FtLTJxR1E&usp=sharing
DslrDashboard V0.30.33.apk can be found also at Google Play
Original comment by Babyloni...@gmail.com
on 19 Feb 2014 at 9:48
Again, thanks Babylonianbird for helping out.
If you have problems updating the router firmware you can try the follwing in
OpenWrt web interface (http://192.168.1.1 by default)
Go to 'System->Backup/Flash firmware' and press the 'Perform reset' button.
After this the router should reboot.
Now again go to 'System->Backup/Flash firmware'. Uncheck the 'Keep settings'
checkbox.
Select the new firmware (sysupgrade image) and flash it.
Be sure to choose the right 'sysupgrade' image that matches your router version
(V1, V2).
Be sure your MR3040 battery is charged, or it is connected to charger.
Be sure to wait 2-4 minutes after you press the flash button (do not power off
your MR3040).
Watch the MR3040 LEDS after your pressed the flash button. It should restart
itself.
Original comment by hub...@gmail.com
on 25 Feb 2014 at 10:10
Original issue reported on code.google.com by
dadof...@gmail.com
on 16 Feb 2014 at 12:44