Open aeonSolutions opened 6 months ago
Hi, that's a good idea. Years ago I used a plugin for EagleCAD to generate gcode for milling PCB traces. I imagine there's something similar for KiCad. But integrating a gerber file loader into PathCAM shouldn't be too hard - I'll look into it.
In the meantime, there are some stand-alone gerber to gcode converters. This one uses the same clipper library as PathCAM: https://github.com/abetusk/gbr2ngc
Thank you. Let me know when you do, and I'll give it a good test run and report back here with additional, useful information for you to use .
Almost there!
from my side, it looks good. Let me know when you have a version ready to test on windows 11 env.
Drumroll please...
https://github.com/xenovacivus/PathCAM/tree/pathcam-gerber
:) :) :)
Installer is updated on that branch as well.
give me a few days to try it and test with my files ....
Tutorial video (kindof): https://www.youtube.com/watch?v=USUT9_Offvs&t=1s
hi there, I'm trying out PathCAM , it looks great, I'm a PCB designer, and to me it would be useful if it has the ability to open Gerber files
thank you