Closed mithro closed 7 years ago
Tested 2 boards. Need a volunteer to test the rest using the subset we have identified. Followed the following steps:
Take device to be tested, and first cable to test it with. Plug into input0.
Power cycle device (always do this for every cable, important). Connect via serial, type ''debug on'.
Ensure displays picture OK, no WER errors. Unplug cable, wait 6 seconds, plug back in, repeat this step 2-3 times. If all OK, mark '1' in sheet.
If one of the steps above failed, paste into spreadsheet 'debug on''s output showing WER errors or otherwise. If "IDELAY busy timeout" ever shows, also include this in paste. Paste in output of 'status' also.
Power cycle device, connect via serial, 'debug on', see if the error noted above has changed or is the same. Note this. Mark an appropriate value into the correct cell (2, 3, 4).
Repeat above for input1.
Repeat all of above for all cables for same device.
Repeat all of the above for all devices.
I think we want each input tested with the following;
Ideally we would want to add but I'm happy to leave that to later...
We need to find a volunteer to help us do this (expected to take a few hours). Have made a few calls, no bites yet.
Spreadsheet (results): https://docs.google.com/spreadsheets/d/1W3p1J-Lb6l-sWmh6n9-YJ_U5o7a0pDmWAR6QIKfCzI0/edit#gid=0