Wacca touch and led error

[JustDaniMusic]

I've downloaded the newest update of WacVR and since then the wacca led and touch does not work anymore. The wacca initialisation screen does give a success on wacca Led. But it does not light up in wacvr. And wacca touch gives a fail.

[xiaopeng12138]

Did you set [touch] enable = 1 in your xxxxtools.ini? And some PC will cashing the DLL file, I need the out put of both cmd window

[JustDaniMusic]

Yes, [touch] enable = 0 and i don't see special things happening in terminal. It just looks like the same when it worked.

[xiaopeng12138]

not 0, when you use mercuryio it should be set to 1

[JustDaniMusic]

The issue stays the same except the terminal does give something different I don't know if any of this is causing an issue with wacvr.

[xiaopeng12138]

pls try the latest build again

[mechamonkey]

Same here, latest version, touch failed. --- Begin mercury_pre_startup --- DVD: hook enabled. Reg hook init Wacca IO: Using custom IO DLL: mercuryio.dll initSharedMemory SharedMemory Size: 116 Elisabeth: Init Wacca touch: Init --- End mercury_pre_startup --- Security: Opened handle Pcbid: Get PCB serial Security: nusec_ioctl_get_nvram_geometry Security: nusec_ioctl_get_nearfull Hwmon: Opened device AmVideo: amDllVideoOpen AmVideo: amDllVideoSetResolution AmVideo: amDllVideoClose Netenv: GetAdaptersInfo: Virtualized LAN configuration: Netenv: Interface IP : 192.168.174. 11 Netenv: Router IP : 192.168.174.254 Netenv: MAC Address : 01:02:03:04:05:06 Netenv: GetAdaptersInfo: Virtualized LAN configuration: Netenv: Interface IP : 192.168.174. 11 Netenv: Router IP : 192.168.174.254 Netenv: MAC Address : 01:02:03:04:05:06 SetupAPI: Interface {4d1e55b2-...} -> Device node $io4\vid_0ca3 USB I/O: Device opened USB I/O: Get manufacturer string USB I/O: Get product string Netenv: GetBestRoute ip4 0 -> ip4 0 USB I/O: Clear board status USB I/O: Set comm timeout USB I/O: Set sampling count USB I/O: GPIO Out Netenv: GetBestRoute ip4 0 -> ip4 c0a8ae0b Netenv: GetBestRoute ip4 0 -> ip4 c0a8ae0b Netenv: Virtualized ICMP Ping to ip4 c0a8aefe Netenv: Virtualized ICMP Ping to ip4 c0a8aefe Netenv: Virtualized ICMP Ping to ip4 c0a8aefe Netenv: Virtualized ICMP Ping to ip4 c0a801db Netenv: Virtualized ICMP Ping to ip4 c0a801db Netenv: Virtualized ICMP Ping to ip4 c0a801db NFC Assembly: Starting backend DLL NFC: felicaPath GetLastError 2 NFC 00: Reset RGB LED 08: Reset RGB LED 08: Get info

--- Begin mercury_pre_startup --- DVD: hook enabled. Reg hook init Wacca IO: Using custom IO DLL: mercuryio.dll initSharedMemory SharedMemory Size: 116 Elisabeth: Init Wacca touch: Init --- End mercury_pre_startup --- Clock: Returning JST timezone Clock: Returning JST timezone onecore\net\netprofiles\service\src\nsp\dll\namespaceserviceprovider.cpp(550)\nlansp_c.dll!00007FF9BEE1D93D: (caller: 00007FF9D675ACF6) LogHr(1) tid(89a4) 8007277C No such service is known. The service cannot be found in the specified name space. Gfx: ShowWindow hook hit clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7045A17) LogHr(1) tid(89a4) 8007029C An assertion failure has occurred. clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7045A17) LogHr(2) tid(89a4) 8007029C An assertion failure has occurred. Gfx: ShowWindow hook hit D3D11: D3D11CreateDevice hook hit clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7046EEC) LogHr(3) tid(4e90) 8007029C An assertion failure has occurred. clientcore\windows\advcore\ctf\uim\tim.cpp(800)\msctf.dll!00007FF9D70462B9: (caller: 00007FF9D7046EEC) LogHr(4) tid(4e90) 8007029C An assertion failure has occurred. D3D11: D3D11CreateDevice hook hit D3D11: D3D11CreateDevice hook hit D3D11: D3D11CreateDevice hook hit D3D11: D3D11CreateDevice hook hit Gfx: ShowWindow hook hit Elisabeth: my_USBIntLED_Init hit! Wacca touch0: Starting backend Wacca Touch0: Get sync board version Wacca touch1: Starting backend Wacca Touch1: Get sync board version Wacca Touch0: Read section 30 Wacca Touch1: Read section 30 Wacca Touch0: Read section 31 Wacca Touch1: Read section 31 Wacca Touch0: Read section 33 Wacca Touch1: Read section 33 Wacca Touch0: Get sync board version Wacca Touch1: Get sync board version Wacca Touch0: get unit board version Wacca Touch1: get unit board version Wacca Touch0: Command A2 Wacca Touch1: Command A2 Wacca Touch0: Command 94 Wacca Touch1: Command 94 Wacca Touch0: Start Auto Wacca Touch1: Start Auto Wacca Touch0: Start Auto Wacca Touch1: Start Auto