xieyaxiongfly
commented
7 years ago Are you using WDR4300? WDR4300 has two WI-Fi cards, one is 9580, which works on 5G. Another one is AR9340, which has only 2 antennas and works on 2.4GHz.
These two WI-FI cards are capable of extracting CSI. So you should work without any problem at 2.4GHz. But you are using AR9340 instead of AR9580 if at 2.4GHz.
I think we are not able to change the setting and use AR9580 at 2.4GHz, or at least I don't know such a method to achieve that.
Hope this answers your question.
On Tue, Jul 11, 2017 at 5:39 AM, Mikhail Zakharov notifications@github.com wrote:
Hello,
The OpenWRT Guide http://pdcc.ntu.edu.sg/wands/Atheros/document/Atheros-CSI-Tool-User-Guide(OpenWrt).pdf on the website mentions that the code has been tested with TL-WDR4300, which uses AR9580. However, I can only seem to be able to use it in 5Ghz band. Are there any tips to get AR9580 to operate in 2.4GHz band in WDR4300 platform?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/xieyaxiongfly/Atheros_CSI_tool_OpenWRT_src/issues/3, or mute the thread https://github.com/notifications/unsubscribe-auth/AF-RQ4moWVFzvstIzqrQu4_QwGKGyP0hks5sMpoTgaJpZM4OTc9t .
--
*-- Yaxiong Xie / *谢亚雄
School of Computer Engineering
Nanyang Technological University, Singapore
mzakharo
Hello,
The OpenWRT Guide on the website mentions that the code has been tested with TL-WDR4300, which uses AR9580. However, I can only seem to be able to use it in 5Ghz band. Are there any tips to get AR9580 to operate in 2.4GHz band in WDR4300 platform?