sonoff 4ch pro R3 version

thereal65man commented 3 years ago

Before creating a new issue please check that you have:

searched the existing issues (both open and closed)
searched the wiki
asked for help in the chat
done the previous things again :)

Fulfilling this template will help developers and contributors help you. Try to be as specific and extensive as possible. If the information provided is not enough the issue will likely be closed.

You can now remove this line and the above ones. Text in italic is meant to be replaced by your own words. If any of the sections below are not relevant to the issue (for instance, the screenshots) then you can delete them.

Question A clear and concise description of what the problem/doubt is.

Screenshots If applicable, add screenshots to help explain your problem.

Device information Copy-paste here the information as it is outputted by the device. You can get this information by typing info via serial, terminal or in the debug tab in the web UI. The relevant information is that surrounded by the scissors-cut lines (---8<-------). If you cannot get this info from the device, please answer this questions:

Arduino Core version
ESPurna version
Flash mode
Device brand, model and version

Tools used

Desktop operating system
Browser & version
IDE & version
Compiler & version (if not embedded in IDE)

Additional context Add any other context about the problem here.

thereal65man commented 3 years ago

I would ask if the espurna firmware version for the new sonoff 4ch pro R3 is the same that R2. Thank you for the answer.

ColinShorts commented 3 years ago

It would appear to work the same as the original 4ch, have a look at this link explaining how to setup tasmota. It mentioned that the config is the same.

thereal65man commented 3 years ago

thank you Colin! I saw the link, i hope espurna for R2 work in R3...

ColinShorts commented 3 years ago

It should hopefully be exactly the same for the original version, R2, and RE. The pro is different from the regular version, but there is no distinction between Original and R2 - see hardware.h / https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-4CH-Pro---R2

There may be physical differences on the board - if there are it would be worth taking pictures and having the wiki updated.

thereal65man commented 3 years ago

... no anyone buy the new R3 ch4 PRO and try to flash it with espurna?...

thereal65man commented 3 years ago

Ok! I just do it! I flashed espurna on sonoff 4ch pro R3! no problems friends, all ok! thank you for the support! ciao!

xoseperez / espurna

sonoff 4ch pro R3 version #2372