search

xoseperez / sonoffsc

Itead Studio SonoffSC custom firmware with MQTT and Domoticz support
GNU General Public License v3.0
104 stars 35 forks source link

ESP not sending commands #27

Closed bastshoes closed 6 years ago

bastshoes commented 6 years ago

I've successfully flashed both chip. Web interface working, telnet console is reachable. The issue is that ESP not sending commands to atmega. If I connect serial to atmega and give commands maually esp starts to get data from atmega and publish it to web interface and mqtt. On telnet I can see commands.

bastshoes commented 6 years ago

It's a hardware bug. On programming pin signal is present and on bridge pins no. Transistor gate was without 3.3v.