Closed 0xBERNDOG closed 11 months ago
I think either a chamfer on the adapter (so the switch can be triggered by the metal bracket), or extend the adapter so that the adapter triggers the switch
At the moment the adapter clashes with the body of the switch while missing the lever
Ok, it seems like the adapter hitting the x axis stop body, I think the switch was supposed to hit the metal part, but somehow the adapter hit it first. Let me make a chamfer for the adapter. In the meantime, you can bend the thin metal piece of the homing switch to make it stick a bit out so it hits the metal first.
I will make an adaption and upload.
On Wed, 29 Nov 2023, 19:26 Steven @.***> wrote:
It's hard to photograph this one, but my ender 3 v2 is missing the x-axis homing switch. I assume that the nozzle head adapter is supposed to hit it?
Photo.29-11-2023.18.20.42.jpg (view on web) https://github.com/xpDIY/3DPlacer/assets/2800058/d13041c5-1ed8-48bf-a3c1-8ebf1fcba39b
Photo.29-11-2023.18.20.52.jpg (view on web) https://github.com/xpDIY/3DPlacer/assets/2800058/a89d3c93-80d6-4ceb-8eca-63089a9b9de1
https://github.com/xpDIY/3DPlacer/assets/2800058/e357546a-cf6f-482d-b3e1-53d183ad36e9
— Reply to this email directly, view it on GitHub https://github.com/xpDIY/3DPlacer/issues/14, or unsubscribe https://github.com/notifications/unsubscribe-auth/A4WD7C4IJXRWMVDUIUOG4RDYG544DAVCNFSM6AAAAAA775QKFWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGAYTOMJXG43TINQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>
The new version has been uploaded, a chamfer is added. Also the home position extender I have put in an extra one with narrower gap so that it can adapt to different tolerance.
BTW, good to see you have the main components setup :)
Thanks, will print them both and update you
Except for these small issues, it's been a smooth process so far. I had been putting it off for ages
Fixed, and the homing extension fits snugly now
It's hard to photograph this one, but my ender 3 v2 is missing the x-axis homing switch. I assume that the nozzle head adapter is supposed to hit it?
https://github.com/xpDIY/3DPlacer/assets/2800058/c9a0d3c2-87af-47b3-b61b-e6c95d8a9659