search

xperiments-in / xtouch

Other
698 stars 69 forks source link

Chamber Option Gets Disabled After Sleep #118

Closed 3DStyle closed 5 months ago

3DStyle commented 5 months ago

Describe the bug I have enabled the chamber option in my xTouch. If I leave my P1S running for a long time of inactivity and come back, the xTouch returns from sleep, and then I can't see the chamber tempature in the main screen. When I go to the settings page, I can see that for some reason, the chamber options is disabled.

To Reproduce Steps to reproduce the behavior:

  1. Leave the printer inactivity for few hours and let the xTouch go to sleep.
  2. Come back and see if the chamber option is enabled.
  3. It usually happens when I have a print overnight, and come back to my P1S and I can see that chamber is disabled.

Expected behavior xTouch should not disable the chamber option...

Screenshots Not applicable.

XTOUCH (please complete the following information):

Printers (please complete the following information):

Additional context Please fix this issue :)

oleyek commented 5 months ago

The same problem here. But I think that the project has been abandoned... :(

xperiments commented 5 months ago

Update to the latest version .102 and check if now is ok

@oleyek NOT is not abandoned

oleyek commented 5 months ago

Updated to .104 and chamber temp is always visible. But I have another issue. Temperature shows 5 degrees and nothing change after ther firmware upgrade. Sensor is functional, because before upgrade and reboot shows correct temp.

3DStyle commented 5 months ago

Updated to .104 and chamber temp is always visible. But I have another issue. Temperature shows 5 degrees and nothing change after ther firmware upgrade. Sensor is functional, because before upgrade and reboot shows correct temp.

Same for me.

I also noticed a critical bug which the time left and progress bar are getting stuck at some point (can't really tell when), and it doesn't reflect the real time left for the print job.

@xperiments