Closed Loadie150 closed 2 weeks ago
I also formatted the SD card to FAT32 before redoing everything.
Have you made the config here ?
Yes I did. I originally did the notepad way, but that didn’t work. So I reformatted the SD card and used the link then the xtouch uploader.
I have the Same issue.
Have y 2FA enabled, if so disable it
It was the 2FA. thanks !
Great
I have the same Problem with the Firmware 0.9.103 2FA is disabled. Config.json created with your Tool.
And you have entered your bambu password or your gmail password? Needs to be from bambu account If you don't have one is explained in the page you created config.json
I have entered my Bambu Login. GMX Mail and the Bambu Password.
Have y 2FA enabled, if so disable it
What’s 2FA?
Problem resolved! Fat finger stupid mistake. Error on password, lol.. Still don't know what 2FA is though.
2fa two factor authentication...
So the process of receiving a Code or have An app for that that validates IS you
El dom, 16 jun 2024 20:33, Loadie150 @.***> escribió:
Problem resolved! Fat finger stupid mistake. Error on password, lol.. Still don't know what 2FA is though.
— Reply to this email directly, view it on GitHub https://github.com/xperiments-in/xtouch/issues/132#issuecomment-2171801731, or unsubscribe https://github.com/notifications/unsubscribe-auth/AADF7LNYWXXXH6DINJQJYIDZHXLA3AVCNFSM6AAAAABJMBZNGOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCNZRHAYDCNZTGE . You are receiving this because you commented.Message ID: @.***>
I double-checked my 2FA disabled twice, formatted the SD card again, and created a new configuration file. The password I entered was copied and pasted. I am still receiving the same error.
Only thing I can say is come to Discord where I am mostly avaliable all time and just ask So we can try to see whats the problem live... Anyone reported not able to connect after solving password reset and disabling 2FA BTW you are in China? Thats the only servers I was unable to test
Also update to .110 please via OTA
Closed in 0.9.115
A lot of thanks to @crossfun for his test and support!!
Describe the bug My P1s has been turned off for 1 week, when I hooked it back up today I read not able to connect. I went in and reinstalled both the .json file and firmware from the Xtouch installer page. When the ESP32 boots up it reads, connecting, then connected, then processing JWT token, then finally FATAL BBl JWT parsing error. This just cycles over and over again.
To Reproduce Steps to reproduce the behavior:
Expected behavior A clear and concise description of what you expected to happen.
Screenshots If applicable, add screenshots to help explain your problem.
XTOUCH (please complete the following information):
Printers (please complete the following information):
Additional context Not sure what to do ?