search

xreef / EByte_LoRa_E220_Series_Library

Arduino LoRa EBYTE E220 LLCC68 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards)..
https://www.mischianti.org/category/my-libraries/lora-e220-llcc68-devices/
Other
88 stars 22 forks source link

In my Module E220-400T30D fix Save mode returned not recognized! #11

Closed AntonioPrevitali closed 1 year ago

AntonioPrevitali commented 1 year ago

Evaluate whether it is okay to implement this change. Also because it seems error in datascheet! Yet my module works like this!

xreef commented 1 year ago

Thanks, Antonio, I am writing to EByte to solve this question. I will write here when I receive a response. Bye Renzo

AntonioPrevitali commented 1 year ago

ho fatto un altra piccola variazione che mi permetto di sottoporle.

Vedi variazioni e commenti in [6613cee] Update Lora_E220.cpp

xreef commented 1 year ago

Hi Antonio, EBayte answers me, and It says that It's impossible. I also do some tests with my modules, and they work correctly.

They ask me for a video with the problem, if you have a logic analyzer or other, you can try to do that.

Bye Renzo

AntonioPrevitali commented 1 year ago

Hi Renzo in the meantime there was an answer from Ebyte. I've come to the conclusion that something very strange is going on with the softserial. In fact if I use serial hardware everything is ok. I did not investigate as C0 arrived instead of C1 However, it is evident that it is not the Ebyte module. Since I solved (using hardwareserial) I close the pull request. do not implement the suggested change.

Grazie.

xreef commented 1 year ago

Ok, anyway, thanks for the support. Bye Renzo