search

xreef / LoRa_E32_Series_Library

Arduino LoRa EBYTE E32 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards). sx1278/sx1276
https://www.mischianti.org
Other
357 stars 73 forks source link

is it compatible with E32 433T20D module? #58

Closed SurenBono closed 10 months ago

SurenBono commented 10 months ago

I need to set it to broadcast address 0xFFFF on channel 0x0004 for the transmission as the datasheet specified and all other reception on their own address but on the same channel 0x0004.. and it supposed to receive the msg at the same time... GPS RCC Experimental 20dBm example transmit data = " dd. mm. yy, weekday, AM 12:00,U+8,"; transparent non encrypted.. it's just timekeeping data..

https://github.com/SurenBono/RadioFrequency/tree/main/HC-12/GPS_HC12_toMany_v10_MEGA

:)

xreef commented 10 months ago

Hi, the EByte module wraps the message and encrypts It (some people decrypt It; there is something in the forum). You can follow the tutorial to manage the broadcast and monitor the environment. Bye Renzo

SurenBono commented 10 months ago

... nobody in 300 km radius of my residency cares or know about any e32 spying/decoding stray rf in my area ... it's ok if the could see it anyway (transparent)it's just a clock signal broadcast experiment similar to a dcf77 radio controlled clock.. I tried a simpler module like a hc12.. but the module broke down..

On Fri, Nov 17, 2023, 7:27 PM Renzo Mischianti @.***> wrote:

Hi, the EByte module wraps the message and encrypts It (some people decrypt It; there is something in the forum). You can follow the tutorial to manage the broadcast and monitor the environment. Bye Renzo

— Reply to this email directly, view it on GitHub https://github.com/xreef/LoRa_E32_Series_Library/issues/58#issuecomment-1816205652, or unsubscribe https://github.com/notifications/unsubscribe-auth/AK2KU55FP3A7NVEGNERNQ73YE5C2JAVCNFSM6AAAAAA7PNIGPGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMJWGIYDKNRVGI . You are receiving this because you authored the thread.Message ID: @.***>