search

xreef / LoRa_E32_Series_Library

Arduino LoRa EBYTE E32 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards). sx1278/sx1276
https://www.mischianti.org
Other
357 stars 73 forks source link

No Support for 5W E32 module #66

Closed Maazulhaq5872 closed 4 months ago

Maazulhaq5872 commented 4 months ago

I am using two ebyte E32 433T37S, which is a 5W module, Whenever i try to use any kind of transmission from the library, i don't recieve anything on the other side. I also checked my wirings multiple times, + also added pull up and voltage divider on rx tx. When I try to get configuration, i receieve "No response from the module, check wiring". I also tried to use usb to ttl converter to configure thorugh rf setting software, but it also said model not supported. I Purchased these through links provided in official website. This is not an invidual project but a team project,, so any kind of help would be appreciated which allow me to do transmission and configure these module.

xreef commented 4 months ago

Hi, the 5w module is supported; probably, you have a power supply issue. Bye Renzo