search

xreef / MKS_WIFI_upgrade_with_BeePrint_web_interface

Firmware for MKS WiFi module from Makerbase with BeePrint Web Interface, tested with Flying Bear Ghost 4/5/6 Reborn Flsun
Other
70 stars 15 forks source link

Can't flash into FBG5. Update resets wifi settings #13

Closed Regressor closed 2 years ago

Regressor commented 2 years ago

Hi, I tried to flash this and there is a problem. After pressing update button (webview or firmware) there is a ~30seconds delay and then error "server reset connection". Then printer is not available by ip and display show its wifi settings gone. After joining wifi network I can see default update web page.

Regressor commented 2 years ago

Flashed it using sd card and ftp. Works.

xreef commented 2 years ago

Perfect! Probably low strength on wifi connection generate that problem. Thanks for your feedback.

WonderCRM commented 2 years ago

Perfect! Probably low strength on wifi connection generate that problem. Thanks for your feedback.

The problem is something else, I also could not flash the option from the video, I had to invent it.

xreef commented 2 years ago

I upload the latest version on my flying Bear ghost 5 without problem. I had that problem when i upload It to the mks robin board that i use for testing, and the wifi was more far. But i do some other upload tests. Bye Renzo

WonderCRM commented 2 years ago

I upload the latest version on my flying Bear ghost 5 without problem. I had that problem when i upload It to the mks robin board that i use for testing, and the wifi was more far. But i do some other upload tests.

It turned out to update only through a memory card. Web files via ftp server after adding it to MksWiFi.

Regressor commented 2 years ago

Perfect! Probably low strength on wifi connection generate that problem. Thanks for your feedback.

Every time I tried to flash it using web mks wifi booted without wifi settings and I had to rejoin it to wifi again and again. It looks like last fbg5 mks wifi updates changed something and this prevents flashing your fw.

xreef commented 2 years ago

Try to use the original firmware that I share on the article, then flash my firmware like explained on the article. Give me a feedback..