I have been using this great library on STA mode, but recently I got a project where there was no wifi available, so I thought I could do it on AP mode (or even AP+STA mode). But it does not work.
Here is what I get on arduino IDE:
`ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030,len:1344
load:0x40078000,len:13516
load:0x40080400,len:3604
entry 0x400805f0
Set AP named:ESP32
AP IP address: 192.168.4.1
Card Mount Successful.
SD opened!
Listing directory: /
DIR : System Volume Information
DIR : Data
FILE: .dropbox.device SIZE: 56
FILE: Backup_dongle.txt SIZE: 370
FILE: settings.txt SIZE: 368
NOT ANONYMOUS
esp32
Ftp server waiting for connection on port 21
Client connected!
_callback 0 1 1
CONNECTED
-U-S-E-R- -e-s-p-3-2-
Command is: USER
USER: esp32 esp32
-P-A-S-S- -e-s-p-3-2-
Command is: PASS
Authentication Ok. Waiting for commands.
-O-P-T-S- -U-T-F-8- -O-N-
Command is: OPTS
200 OK, UTF8 ON
-P-W-D-
Command is: PWD
-T-Y-P-E- -I-
Command is: TYPE
-P-A-S-V-
Command is: PASV
Connection management set to passive
Listening at 0.0.0.0:50009
-M-L-S-D-
Command is: MLSD
List of file!! And what I get on Filezilla: Status: Connecting to 192.168.4.1:21...
Status: Connection established, waiting for welcome message...
Status: Plain FTP is insecure. Please switch to FTP over TLS.
Status: Logged in
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is your current directory
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (0,0,0,0,195,89)
Command: MLSD
Error: The data connection could not be established: WSAEADDRNOTAVAIL - Cannot assign requested address
Response: 425 No data connection
Error: Failed to retrieve directory listing`
Finally, I'm using arduino IDE 1.8.19 and esp32 board version 2.0.3.
I'm also attatching an arduino code where >I manage to do it in STA mode and if I comment and discomment STA part and AP part, I should get it to work on AP mode (but doesn't work and produce what I just posted here.
ESP32_FTP_STA_n_AP.txt
Hi
I have been using this great library on STA mode, but recently I got a project where there was no wifi available, so I thought I could do it on AP mode (or even AP+STA mode). But it does not work. Here is what I get on arduino IDE: `ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0030,len:1344 load:0x40078000,len:13516 load:0x40080400,len:3604 entry 0x400805f0 Set AP named:ESP32 AP IP address: 192.168.4.1 Card Mount Successful. SD opened! Listing directory: / DIR : System Volume Information DIR : Data FILE: .dropbox.device SIZE: 56 FILE: Backup_dongle.txt SIZE: 370 FILE: settings.txt SIZE: 368 NOT ANONYMOUS esp32 Ftp server waiting for connection on port 21 Client connected!
Finally, I'm using arduino IDE 1.8.19 and esp32 board version 2.0.3.
I'm also attatching an arduino code where >I manage to do it in STA mode and if I comment and discomment STA part and AP part, I should get it to work on AP mode (but doesn't work and produce what I just posted here. ESP32_FTP_STA_n_AP.txt
Thank you! Cheers, Luís Pereira.