search

xsp1989 / zigbeeFirmware

204 stars 21 forks source link

Hardware settings of ZB-GW04 #34

Closed MattWestb closed 1 year ago

MattWestb commented 1 year ago

Sorry for pinging you @xsp1989 then you is not working for Sonoff longer. I have on technical question. You was saying that the ZB-GW04 is having PCB lines for hardware flow control but i was not asking for the pin / pads used in both ends. We have one user that is trying (successfully) cooking RCP firmware for that hardware and its better if we can getting the HW flow control working for getting stable communication with the RCP.

If you have time and knowledge your replay is more then welcome and if not its very OK.

All the best for you !!

Mattias W

xsp1989 commented 1 year ago

ZB-GW04 is designed and produced by easyiot, CTS/RTS is only supported by the latest hardware version, and the hardware version is v1.2.

MattWestb commented 1 year ago

Is you knowing and can sharing witch pins ( pads is using for CTS / RTS ?

Thanks in advance.

xsp1989 commented 1 year ago

d8914012d5b7db1995686c8737f58cc

PD03-RTS PD04-CTS

MattWestb commented 1 year ago

Great thanks also for all support you have done for the community !!

Mattias W