Open Hedda opened 1 year ago
Hedda
commented
1 year ago FYI, ksjh has begun some work on such automated firmware building using Github Actions and started a related discussion on it:
https://github.com/ksjh/silabs-firmware-builder
https://github.com/ksjh/silabs-firmware-builder/discussions/2
Note that most of the automation magic with silabs-firmware-builder looks to happen in Github Actions workflows:
Hedda
commented
1 year ago @xsp1989 perhaps you have some interest and input or feedback on this discussion(?), see -> https://github.com/ksjh/silabs-firmware-builder/issues/17
Also check out this repo by darkxst for patches:
https://github.com/darkxst/silabs-builder-remote
PS: Note that it is not the first post there itself that is interesting but rather the discussion further down that it lead to.
Hedda
commented
1 year ago FYI, darkxst fork of Nabu Casa's silabs-firmware-builder has added support for multiple hardware manifests to allow override configs for automatic builds to enable automatic building of firmware images for many different Silabs based EFR32 adapters:
https://github.com/darkxst/silabs-firmware-builder/blob/manifestjs/manifests
As such he is the first to have firmware builds for Silicon Labs EmberZNet 7.3 (though untested since they are automatically built):
https://github.com/darkxst/silabs-firmware-builder/tree/main/firmware_builds
PS: He is also offering experimental builds for the same EmberZNet version and hardware but with different baud rate speeds.
Hedda
commented
1 year ago @xsp1989 FYI, darkxst is not only continuing to improve his fork of silabs-firmware-builder and he has now also forked the Silabs Flasher add-on for Home Assistant and is working on making it compatible with many different Silicon Labs based USB adapters, see:
PS: Another tip is to also check out his blog -> https://dialedin.com.au/blog/
Hedda
commented
1 year ago @xsp1989 slightly off-topic but thought that you might be interested to know that darkxst have begun working on an experimental "Silicon Labs Multipan Flasher Add-on" as a fork of the official "Silabs Flasher" addon for Home Assistant to let users easily flash the firmware images from Home Assistant's GUI for built with Silicon Labs firmware builder on the other products that the official Home Assistant SkyConnect dongle, e.i. Zigbee Coordinator adapters like Easyiot zigbee 3.0 USB Dongle model ZB-GW04, ITead’s "Sonoff Zigbee 3.0 USB Dongle Plus V2” (model “ZBDongle-E”), and Elelabs ELU013 USB radio stick:
https://github.com/darkxst/multipan_flasher/tree/main
https://github.com/darkxst/multipan_flasher/blob/main/multipan_flasher/README.md
"This is a fork of the official Silabs Flasher HA Addon, but is shipped with my firmware builds. Once configured, It will automatically update dongle firmware on next reboot of HA, or you can manually run it after installing/updating. Currently supports ZBDongle-E and a few others."
Developers and users that have issues with it can create an issue here:
xsp1989
commented
1 year ago Thank you very much for your suggestions. I think this is a very good project, but there are still some commercial development projects that need support. After I have completed the development of other projects, I will switch to a new development platform. This question Keep it for now, don't close it
Hedda
commented
4 months ago FYI, it looks like puddly has in the past few weeks rewritten and reorganized much of Nabu Casa’s upstream Silabs firmware builder, and even added Z-Wave Controller too, plus archived their repo for binaries:
https://github.com/NabuCasa/silabs-firmware-builder/pulls?q=is%3Apr+is%3Aclosed
https://github.com/NabuCasa/silabs-firmware-builder/commits/main/
[!IMPORTANT]
New firmwares are released straight from the SiLabs Firmware Builder repository. This repository contains all past firmwares and will not receive future updates.
https://github.com/NabuCasa/silabs-firmware
So, new official Zigbee and Thread firmware releases for SkyConnect + Yellow and future Silicon Labs firmware will from now be released straight from the SiLabs Firmware Builder repository
As such the "old" silabs-firmware repository is now listed as archived and will not receive more updates but it will remain available as it contains all past firmware versions.
PS: Off-topic however interesting is that the silabs-firmware-builder now also contain Z-Wave Controller firmware for the upcoming official Home Assistant Z-Wave Controller USB adapter hardware that Nabu Casa is working on -> https://www.home-assistant.io/blog/2024/05/08/zwave-is-not-dead
@xsp1989 Please consider making use of the "Silicon Labs firmware builder" which is a new open-source firmware build system that Home Assistant founders have now among other things announced as a common script tool set for building firmware images for Silabs based hardware.
https://www.home-assistant.io/blog/2023/02/08/state-of-matter-and-thread/#building-firmware-for-silicon-labs-chips
(Note that this is only just one section from https://www.home-assistant.io/blog/2023/02/08/state-of-matter-and-thread/ )
In summary, they have open-sourced and released the ""Silicon Labs firmware builder" project which is a collection of automated build scripts to help make it easier to create reproducible firmware builds for Zigbee and Thread based SoCs from Silicon Labs.
Please consider making use of this firmware build system and if possible also contribute any improvements to upstream project:
https://github.com/NabuCasa/silabs-firmware-builder
As I understand it, right now it allows you to build either Zigbee EmberZNet NCP (Zigbee Coordinator on Silicon Labs Network Co-Processor) firmware images, OpenThread RCP (Radio Co-Processor), or RCP Multi-PAN firmware images for OTBR (multi-protocol Zigbee EmberZNet and OpenThead Border Router using Radio Co-Processor) profiled for their own Home Assistant SkyConnect USB stick/dongle and their EFR32MG21-based radio module integrated into the Home Assistant Yellow appliance, however, the idea is that you can build profiles for other Silicon Labs hardware adapters/dongles/sticks/modules as well. It could of course also be extended to not only support different Silicon Labs based hardware adapters/dongles/sticks/modules but also different type of firmware images, (like maybe OpenThead Border Router on NCP).
(Examples of firmware image builds that it can produce can be found here -> https://github.com/NabuCasa/silabs-firmware ).
Note that was just one of their announcements in that blog post; in related news, they also released "SL Web Tools" which enable flashing firmware to Silabs-based adapters directly from a web page as well as a "SiLabs multi-flasher" as a Python script flashing tool:
https://www.home-assistant.io/blog/2023/02/08/state-of-matter-and-thread/#silabs-multi-flasher--sl-web-tools
(Again note that this is only just one section from https://www.home-assistant.io/blog/2023/02/08/state-of-matter-and-thread/ )
https://github.com/NabuCasa/universal-silabs-flasher
https://github.com/NabuCasa/sl-web-tools
https://www.youtube.com/watch?v=-88K23e8XYw&t=2s&ab_channel=HomeAssistant
The "SL Web Tools" project is available as open source. It allows users to manage the firmware on Zigbee/Thread sticks using SiLabs chips directly from their browser, with no terminals or compilation necessary. This allows any creator to offer easy firmware updates to their users and make experimental updates available to test bug fixes quickly."
To see it in action, SL Web Tools for flashing firmware has been added to the Home Assistant SkyConnect documentation.
https://skyconnect.home-assistant.io
SL Web Tools is powered by another new open-source Python package “silabs-universal-flasher” → GitHub - NabuCasa/universal-silabs-flasher: Flashes Silicon Labs radios running EmberZNet or CPC multi-pan firmware
For reference; the firmware build system for Silicon Labs was made by Home Assistant developer/engineer and Nabu Casa employee Stefan Agner (a.k.a. agners, who also developed the EFR32MG21-based Home Assistant SkyConnect USB stick/dongle as well as the EFR32MG21-based radio module integrated into the Home Assistant Yellow appliance for Rasberry Pi 4 Compute Module). And the "universal-silabs-flasher" firmware tool was made by puddly who is also one of the lead developers of zigpy and the radio libraries for zigpy that is used in Home Assistant's ZHA integration (among other projects).
PS: They made updates to their documentation as relevant to Silicon Labs based adapters with correct firmware for Zigbee or Thread: