Open zxlhhyccc opened 4 years ago
问问题前先搜索ISSUE,并搞清楚下面的问题:
- 检查
-key xxx
至少三遍, _保证_两边一致。- 保证
-nocomp, -datashard, -parityshard, -key, -crypt
两边一致。- 是否在服务器端,正确设定了转发的目标服务器地址 --target。
- 如果第3条不确定,尝试在服务器上telnet target port试试。
- 防火墙是否关闭了UDP通信。
- 两端的版本是否一致?
- 是不是最新版本?
- 两端分别是什么操作系统?
- 两端的输出日志是什么?
Before firing issue, make sure you figured out the following common questions.
PLEASE DO SEARCH FIRST.
- Check your
-key xxx
for at least 3 times, MAKE SURE both sides share the same secret.-nocomp, -datashard, -parityshard, -key, -crypt
must be the same on both side.- Did you correctly set the -target on the server side?
- MAKE SURE
telnet target port
on your server successful(don't ask me why couldn't).- Does your firewall allows UDP communications? (including your ISP Cable-Modem)
- Are you using the same version for both client & server
- Are you using the latest release?
- Which OS do you use?
- Which end for this issue related to, client or server?
ramv5可以正常运行。。。
不用纠结 cpuinfo 的信息显示什么,路由器这些 arm 都是阉割版的,用 arm5 就好。
跟小米路由一样,显示armv7,实际是阉割版,根本不支持armv7的浮点型,所以报错,改为armv5就行了
问问题前先搜索ISSUE,并搞清楚下面的问题:
-key xxx
至少三遍, 保证两边一致。-nocomp, -datashard, -parityshard, -key, -crypt
两边一致。Before firing issue, make sure you figured out the following common questions.
PLEASE DO SEARCH FIRST.
-key xxx
for at least 3 times, MAKE SURE both sides share the same secret.-nocomp, -datashard, -parityshard, -key, -crypt
must be the same on both side.telnet target port
on your server successful(don't ask me why couldn't).