search

xueliu / lora-feed

Semtech packages and ChirpStack Network Server stack for OpenWRT
GNU General Public License v2.0
76 stars 55 forks source link

running LoraGW packetforwarder #10

Closed pacmenDE closed 4 years ago

pacmenDE commented 4 years ago

Hi,

i´ve tested your feed and compiled succesufully packet_forwarder and libloragw with openwrt 18.06. for raspi zero.

But i am not able tu start packet forwarder! Bu i ve done:

/etc/init.d/lora_packet_forwarder reset pin is on raspi zero is on Gpio 17 (phys. pin11) So i have changed reset pin to 11, 17 and wiringpi GPIO 0. with reload and restart. but packet_forwarder cannot start. i´ve chnaged the frequenz from 8000000 to 200000 in menuconfig (libloragw) because the rak2245 concentrator it uses these frequencies. But it´s not running too.

i have an raspbian image with running lora gw und packet forwarder on a second SD Card and it´s running. So it´s not a cabling issue or soo

You have any idea? Patrik

xueliu commented 4 years ago

Hello Patrik,

It is great that it finally can be compiled under 18.06.

Please check following things:

  1. remove wiringpi. It is not used. It is removed from lora-feed yesterday.
  2. check whether /dev/spi-dev and kmod-spi-dev is there.
  3. check /boot/config.txt according to https://openwrt.org/toh/raspberry_pi_foundation/raspberry_pi

Regards

pacmenDE commented 4 years ago

Hello Xue, wiring pi is removed. spidev exist image and at config.txt spi is on.

xueliu commented 4 years ago

Hello Patrik, I need further informaion like program log.

pacmenDE commented 4 years ago

good mornng, here the System log. Mon Aug 5 07:50:41 2019 user.notice root: lora_pkt_fwd: Start Mon Aug 5 07:50:41 2019 user.notice root: lora_pkt_fwd: Generate /etc/global_conf.json Mon Aug 5 07:50:41 2019 user.notice root: lora_pkt_fwd: Reset SX1301 with pin 17 Mon Aug 5 07:50:47 2019 user.notice root: lora_pkt_fwd: SX1301 reset completed Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: Beacon Packet Forwarder for Lora Gateway Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: Version: 0 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: Lora concentrator HAL library version info Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: Version: 0; Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Little endian host Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: found global configuration file /etc/global_conf.json, parsing it Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: /etc/global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: lorawan_public 1, clksrc 1 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: no configuration for LBT Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: antenna_gain 0 dBi Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Configuring TX LUT with 16 indexes Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: radio 0 enabled (type SX1257), center frequency 867500000, RSSI offset -166.000000, tx enabled 1, tx_notch_freq 129000 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: radio 1 enabled (type SX1257), center frequency 868500000, RSSI offset -166.000000, tx enabled 0, tx_notch_freq 0 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: /etc/global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: gateway MAC address is configured to B827EBFFFE706836 Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: server hostname or IP address is configured to "router.eu.thethings.network" Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: upstream port is configured to "1700" Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: downstream port is configured to "1700" Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: downstream keep-alive interval is configured to 10 seconds Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: statistics display interval is configured to 30 seconds Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: upstream PUSH_DATA time-out is configured to 100 ms Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: packets received with a valid CRC will be forwarded Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: packets received with a CRC error will NOT be forwarded Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: INFO: packets received with no CRC will NOT be forwarded Mon Aug 5 07:50:48 2019 daemon.info lora_pkt_fwd[949]: ERROR: [main] failed to start the concentrator Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: Beacon Packet Forwarder for Lora Gateway Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: Version: 0 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: Lora concentrator HAL library version info Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: Version: 0; Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Little endian host Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: found global configuration file /etc/global_conf.json, parsing it Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: /etc/global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: lorawan_public 1, clksrc 1 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: no configuration for LBT Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: antenna_gain 0 dBi Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Configuring TX LUT with 16 indexes Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: radio 0 enabled (type SX1257), center frequency 867500000, RSSI offset -166.000000, tx enabled 1, tx_notch_freq 129000 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: radio 1 enabled (type SX1257), center frequency 868500000, RSSI offset -166.000000, tx enabled 0, tx_notch_freq 0 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: /etc/global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: gateway MAC address is configured to B827EBFFFE706836 Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: server hostname or IP address is configured to "router.eu.thethings.network" Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: upstream port is configured to "1700" Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: downstream port is configured to "1700" Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: downstream keep-alive interval is configured to 10 seconds Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: statistics display interval is configured to 30 seconds Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: upstream PUSH_DATA time-out is configured to 100 ms Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: packets received with a valid CRC will be forwarded Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: packets received with a CRC error will NOT be forwarded Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: INFO: packets received with no CRC will NOT be forwarded Mon Aug 5 07:50:53 2019 daemon.info lora_pkt_fwd[956]: ERROR: [main] failed to start the concentrator Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: Beacon Packet Forwarder for Lora Gateway Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: Version: 0 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: Lora concentrator HAL library version info Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: Version: 0; Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: *** Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Little endian host Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: found global configuration file /etc/global_conf.json, parsing it Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: /etc/global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: lorawan_public 1, clksrc 1 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: no configuration for LBT Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: antenna_gain 0 dBi Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Configuring TX LUT with 16 indexes Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: radio 0 enabled (type SX1257), center frequency 867500000, RSSI offset -166.000000, tx enabled 1, tx_notch_freq 129000 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: radio 1 enabled (type SX1257), center frequency 868500000, RSSI offset -166.000000, tx enabled 0, tx_notch_freq 0 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 0> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 1> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 2> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 3> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 4> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 5> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 6> radio 0, IF 200000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora multi-SF channel 7> radio 0, IF 400000 Hz, 125 kHz bw, SF 7 to 12 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: Lora std channel> radio 1, IF -200000 Hz, 250000 Hz bw, SF 7 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: FSK channel> radio 1, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: /etc/global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: gateway MAC address is configured to B827EBFFFE706836 Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: server hostname or IP address is configured to "router.eu.thethings.network" Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: upstream port is configured to "1700" Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: downstream port is configured to "1700" Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: downstream keep-alive interval is configured to 10 seconds Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: statistics display interval is configured to 30 seconds Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: upstream PUSH_DATA time-out is configured to 100 ms Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: packets received with a valid CRC will be forwarded Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: packets received with a CRC error will NOT be forwarded Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: INFO: packets received with no CRC will NOT be forwarded Mon Aug 5 07:50:58 2019 daemon.info lora_pkt_fwd[957]: ERROR: [main] failed to start the concentrator Thanks Patrik

pacmenDE commented 4 years ago

and kernel log: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.184 (patrik@MyPC) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7820-65a4053) ) #0 Tue Jul 23 17:29:54 2019 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt:Machine model: Raspberry Pi Zero W Rev 1.1 [ 0.000000] cma: Reserved 16 MiB at 0x1ac00000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] free_area_init_node: node 0, pgdat c0541a68, node_mem_map dbc6a700 [ 0.000000] Normal zone: 896 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792 [ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:25:3D:63 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 432480K/458752K available (3841K kernel code, 152K rwdata, 1076K rodata, 156K init, 348K bss, 9888K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xdc800000 - 0xff800000 ( 560 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc03c8988 (3843 kB) [ 0.000000] .init : 0xc04f5000 - 0xc051c000 ( 156 kB) [ 0.000000] .data : 0xc051c000 - 0xc0542240 ( 153 kB) [ 0.000000] .bss : 0xc0542240 - 0xc05992ac ( 349 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000073] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000160] bcm2835: system timer (irq = 27) [ 0.000643] Console: colour dummy device 80x30 [ 0.001380] console [tty1] enabled [ 0.001446] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) [ 0.060316] pid_max: default: 32768 minimum: 301 [ 0.060501] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.060562] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.061342] CPU: Testing write buffer coherency: ok [ 0.061750] Setting up static identity map for 0x8200 - 0x825c [ 0.070843] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.071330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.071432] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.073618] pinctrl core: initialized pinctrl subsystem [ 0.074997] NET: Registered protocol family 16 [ 0.077378] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.085711] cpuidle: using governor ladder [ 0.085801] cpuidle: using governor menu [ 0.086307] Serial: AMBA PL011 UART driver [ 0.090731] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.091438] uart-pl011 20201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe [ 0.131598] bcm2835-dma 20007000.dma: DMA legacy API manager at dc80d000, dmachans=0x1 [ 0.134722] SCSI subsystem initialized [ 0.135028] usbcore: registered new interface driver usbfs [ 0.135179] usbcore: registered new interface driver hub [ 0.135322] usbcore: registered new device driver usb [ 0.140699] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-11-23 19:36 [ 0.142265] clocksource: Switched to clocksource timer [ 0.152880] NET: Registered protocol family 2 [ 0.153851] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.153987] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.154098] TCP: Hash tables configured (established 4096 bind 4096) [ 0.154220] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.154288] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.154567] NET: Registered protocol family 1 [ 0.156032] Crashlog allocated RAM at address 0x3f00000 [ 0.156493] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.166140] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.168293] io scheduler noop registered [ 0.168369] io scheduler deadline registered [ 0.168671] io scheduler cfq registered (default) [ 0.174540] BCM2708FB: allocated DMA memory 5ad00000 [ 0.174651] BCM2708FB: allocated DMA channel 0 @ dc80d000 [ 0.222414] Console: switching to colour frame buffer device 228x61 [ 0.259927] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.261453] console [ttyS0] disabled [ 0.261699] 20215040.serial: ttyS0 at MMIO 0x0 (irq = 53, base_baud = 31250000) is a 16550 [ 0.733537] console [ttyS0] enabled [ 0.738384] vc-cma: Videocore CMA driver [ 0.742625] vc-cma: vc_cma_base = 0x00000000 [ 0.747590] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.753312] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.759259] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 0.787035] brd: module loaded [ 0.800266] loop: module loaded [ 0.804049] usbcore: registered new interface driver smsc95xx [ 0.810140] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.044407] Core Release: 2.80a [ 1.047763] Setting default values for core params [ 1.052923] Finished setting default values for core params [ 1.259023] Using Buffer DMA mode [ 1.262594] Periodic Transfer Interrupt Enhancement - disabled [ 1.268741] Multiprocessor Interrupt Enhancement - disabled [ 1.274625] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.279231] Dedicated Tx FIFOs mode [ 1.283662] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xdad14000 dma = 0x5ad14000 len=9024 [ 1.294063] FIQ FSM acceleration enabled for : [ 1.294063] Non-periodic Split Transactions [ 1.294063] Periodic Split Transactions [ 1.294063] High-Speed Isochronous Endpoints [ 1.294063] Interrupt/Control Split Transaction hack enabled [ 1.336076] dwc_otg: Microframe scheduler enabled [ 1.336252] WARN::hcd_init_fiq:459: FIQ on core 0 at 0xc02952a0 [ 1.351978] WARN::hcd_init_fiq:460: FIQ ASM at 0xc0295520 length 36 [ 1.367836] WARN::hcd_init_fiq:486: MPHI regs_base at 0xdc8ac000 [ 1.383356] dwc_otg 20980000.usb: DWC OTG Controller [ 1.397599] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.414223] dwc_otg 20980000.usb: irq 56, io mem 0x00000000 [ 1.429043] Init: Port Power? op_state=1 [ 1.442075] Init: Power Port (0) [ 1.454937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.471518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.488430] usb usb1: Product: DWC OTG Controller [ 1.502654] usb usb1: Manufacturer: Linux 4.9.184 dwc_otg_hcd [ 1.517944] usb usb1: SerialNumber: 20980000.usb [ 1.532957] hub 1-0:1.0: USB hub found [ 1.545987] hub 1-0:1.0: 1 port detected [ 1.559837] dwc_otg: FIQ enabled [ 1.559847] dwc_otg: NAK holdoff enabled [ 1.559854] dwc_otg: FIQ split-transaction FSM enabled [ 1.559873] Module dwc_common_port init [ 1.560226] usbcore: registered new interface driver uas [ 1.574907] usbcore: registered new interface driver usb-storage [ 1.590361] mousedev: PS/2 mouse device common for all mice [ 1.606548] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer [ 1.623410] bcm2835-cpufreq: min=700000 max=1000000 [ 1.638381] sdhci: Secure Digital Host Controller Interface driver [ 1.653991] sdhci: Copyright(c) Pierre Ossman [ 1.668466] sdhost: log_buf @ dad13000 (5ad13000) [ 1.752321] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.767064] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.779480] mmc-bcm2835 20300000.mmc: DMA channel allocated [ 1.812617] Indeed it is in host mode hprt0 = 00041901 [ 1.890106] random: fast init done [ 1.912449] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.926573] vchiq: vchiq_init_state: slot_zero = 0xdad80000, is_master = 0 [ 1.948239] NET: Registered protocol family 10 [ 1.962821] NET: Registered protocol family 17 [ 1.973753] 8021q: 802.1Q VLAN Support v1.8 [ 1.988348] vc-sm: Videocore shared memory driver

[ 2.011769] [vc_sm_connected_init]: end - returning 0 [ 2.023538] usb 1-1: new low-speed USB device number 2 using dwc_otg [ 2.039100] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 2.055650] Indeed it is in host mode hprt0 = 00041901 [ 2.128010] of_cfs_init [ 2.137144] of_cfs_init: OK [ 2.148135] Waiting for root device /dev/mmcblk0p2... [ 2.167172] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 2.179249] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.195227] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.208356] mmc0: new high speed SDHC card at address e624 [ 2.221726] mmcblk0: mmc0:e624 SU04G 3.69 GiB [ 2.233919] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 2.249072] mmcblk0: p1 p2 [ 2.258970] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.278553] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. [ 2.292889] Freeing unused kernel memory: 156K [ 2.304009] This architecture does not have kernel memory protection. [ 2.387034] usb 1-1: New USB device found, idVendor=04f2, idProduct=0833 [ 2.400972] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.414790] usb 1-1: Product: USB Keyboard [ 2.425312] usb 1-1: Manufacturer: CHICONY [ 2.684422] init: Console is alive [ 2.695179] init: - watchdog - [ 2.896124] mmc1: new high speed SDIO card at address 0001 [ 3.193382] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.271151] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.295986] init: - preinit - [ 3.982506] random: jshn: uninitialized urandom read (4 bytes read) [ 4.044338] random: jshn: uninitialized urandom read (4 bytes read) [ 4.089063] random: jshn: uninitialized urandom read (4 bytes read) [ 7.794981] mount_root: switching to f2fs overlay [ 7.906181] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 7.930762] urandom-seed: Seeding with /etc/urandom.seed [ 8.068350] procd: - early - [ 8.081410] procd: - watchdog - [ 8.819782] procd: - watchdog - [ 8.833213] procd: - ubus - [ 8.908436] urandom_read: 1 callbacks suppressed [ 8.908448] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.943995] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.960393] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.977867] procd: - init - [ 9.573608] kmodloader: loading kernel modules from /etc/modules.d/ [ 9.620008] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 9.647728] hidraw: raw HID events driver (C) Jiri Kosina [ 9.676117] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [ 9.691174] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [ 9.709569] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.730692] nf_conntrack version 0.5.0 (7168 buckets, 28672 max) [ 9.793301] input: CHICONY USB Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:04F2:0833.0001/input/input0 [ 9.882828] hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-20980000.usb-1/input0 [ 9.919510] input: CHICONY USB Keyboard as /devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.1/0003:04F2:0833.0002/input/input1 [ 10.003104] hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-20980000.usb-1/input1 [ 10.023957] usbcore: registered new interface driver usbhid [ 10.037305] usbhid: USB HID core driver [ 10.067291] xt_time: kernel timezone is -0000 [ 10.106038] PPP generic driver version 2.4.2 [ 10.120531] NET: Registered protocol family 24 [ 10.148583] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.295140] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.txt failed with error -2 [ 10.314993] brcmfmac mmc1:0001:1: Falling back to user helper [ 10.394750] firmware brcm!brcmfmac43430-sdio.raspberrypi,model-zero-w.txt: firmware_loading_store: map pages failed [ 10.505554] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 10.522898] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.clm_blob failed with error -2 [ 10.541499] brcmfmac mmc1:0001:1: Falling back to user helper [ 10.573000] firmware brcm!brcmfmac43430-sdio.clm_blob: firmware_loading_store: map pages failed [ 10.590521] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available [ 10.615889] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab [ 10.678120] kmodloader: done loading kernel modules from /etc/modules.d/ [ 13.869827] random: crng init done [ 13.881780] random: 3 urandom warning(s) missed due to ratelimiting [ 21.934683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.107523] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

xueliu commented 4 years ago

It is hard to say where is the problem. You may use the utils together with libloragw to find the problems.

pacmenDE commented 4 years ago

Hi Xue, now it runs! :-)

But with some modification... :-)

Over Luci > Network > Lora... I can not start lora packet forwarder... Here the screenshot image

This helped me to run lora packet forwarder. 1.) manual configured the /etc/global_config.json 2.) /usr/sbin/ create a lora_reset.sh fo reseting SX1301 (based on this script https://raw.githubusercontent.com/Lora-net/lora_gateway/master/reset_lgw.sh)

  1. modified the sleep function from 0.1 to 1
  2. chmod 0777 reset.sh 5 run reset sript 6 start lora_packet_forwarder

and it runs.... :-)

pacmenDE commented 4 years ago

changed "/etc/init.d/lora_packet_forwarder" solved the problem! look for pull request