openwrt中运行XX-Mini，IPV6 fail

scljy commented 7 years ago

XX-Mini Version : 1.3.3 (python/2.7.9 pyopenssl/0.10) Listen Address : 192.168.1.1:8087 Setting File : manual.ini/proxy.ini GAE APPID : Proud to Use My APPID Pac Server : http://192.168.1.1:8086/proxy.pac CA File : http://192.168.1.1:8086/CA.crt Pac File : file:///mnt/usb/ljy/xx-mini/data/proxy.pac

Nov 20 10:27:27.671 - [WARNING] network IPv6 fail Nov 20 10:27:30.334 - [INFO] SSL use version:TLSv1 Nov 20 10:27:30.341 - [INFO] OpenSSL dont't support npn/alpn, no HTTP/2 supported. WARNING:root:status:302 Nov 20 10:27:30.625 - [INFO] load ip range file:/mnt/usb/ljy/xx-mini/ip_range_ipv6.txt Nov 20 10:27:31.388 - [INFO] good ip num:0, bad ip num:0 Nov 20 10:27:31.519 - [WARNING] no enough ip Nov 20 10:27:31.980 - [INFO] server 0.0.0.0:8087 started. Nov 20 10:27:32.051 - [INFO] server 0.0.0.0:8086 started. Nov 20 10:27:32.058 - [WARNING] no enough ip Nov 20 10:27:32.133 - [INFO] PACServer from:127.0.0.1:40311 GET /proxy.pac Nov 20 10:27:32.161 - [INFO] try download 'https://easylist-downloads.adblockplus.org/easylistchina.txt' to update pacfile Nov 20 10:27:32.764 - [WARNING] no enough ip Nov 20 10:27:33.274 - [WARNING] no enough ip

xyuanmu commented 7 years ago

你当前的运营商不支持IPv6，可以试试配置 OpenWrt 6to4

xyuanmu commented 7 years ago

对了，你的openssl比较低，试试这条命令，看能不能升级： opkg install pyopenssl python-openssl --force-depends --force-overwrite

Leeto1970 commented 6 years ago

可以尝试用lede的固件，用mini没有问题，openwrt有些软件已经安装不上了。lede相当于openwrt另外一个新的分支，用起来还不错，支持的软件还挺多

xyuanmu / XX-Mini

openwrt中运行XX-Mini，IPV6 fail #152