Closed GoogleCodeExporter closed 9 years ago
I remounted /system rw and created /system/lib/modules and copied wireless.ko
and modules.sqf
However now it can only detect open-wireless networks
Original comment by jsea...@gmail.com
on 27 Oct 2011 at 9:02
Ok,I redid all flash process with gb237-111025-224mb-r193 (the recomended) and
found out the modules install process in the wiki.
However:
- The /system/lib/modules was not mounted and modules dir didn't even existed
- I created the modules dir, copy the wireless.ko and modules.sqf and did the
busybox mount command
- The mount is losted after a reboot and probably the modules inside the .sqf
image can't be accessed unless you mount them manually again
- I can't access my AP.Don't know if it's because i simply can't access any AP
with encryption (can see unecrypted APs) or if its because its on channel 13
and outside regulatory domain set in driver.
Suggestions?
Original comment by jsea...@gmail.com
on 27 Oct 2011 at 4:47
Solved.
Just need to set the regulatory domain for 14 channels in Wi-Fi settings ->
Advanced
I will open another bug report for the modules problem
Original comment by jsea...@gmail.com
on 27 Oct 2011 at 5:06
http://code.google.com/p/openeve/wiki/Installation
Original comment by wkp...@gmail.com
on 28 Oct 2011 at 12:53
Put the current boot img on the sd card and then boot it through recovery. you
can access recovery through fastboot and openetna winflasher
Original comment by zubair2u...@gmail.com
on 28 Oct 2011 at 6:38
Original issue reported on code.google.com by
jsea...@gmail.com
on 27 Oct 2011 at 8:52Attachments: