search

xzckiller / openeve

Automatically exported from code.google.com/p/openeve
0 stars 1 forks source link

gingerbread boot image snapshot (for Gingerbread beta) #24

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
this is a bootimage snapshot.

== Changes ==
 * sync with CodeAurora repo.
 * mainly mdp/msm_fb/otg/usb drivers are updated.
 * change pmem allocation method.
 * now max available ram is about ~200MB

== Warning ==
This is a snapshot kernel. *not for normal use.*

Original issue reported on code.google.com by wkp...@gmail.com on 13 Apr 2011 at 11:43

GoogleCodeExporter commented 9 years ago 
new boot image Snapshot for testing is fine.

the issues i encountered are
1. frequent restarts
2. touch response seems to be bit sluggish.
3. battery draining faster ( might be because of restarts)

Original comment by yakaaith...@gmail.com on 20 Apr 2011 at 5:24

GoogleCodeExporter commented 9 years ago 
I installed this over my existing installation.
I've got stereo sound now, win!
However my available RAM doesn't seem to have changed.

Original comment by rais...@gmail.com on 20 Apr 2011 at 7:29

GoogleCodeExporter commented 9 years ago 
I haven't yet seen any kernel panics after disconnecting my USB cable, whether 
I enable USB Mass Storage or not.

Original comment by rais...@gmail.com on 20 Apr 2011 at 7:33

GoogleCodeExporter commented 9 years ago 
why do n't you base on lastest kenel?

Original comment by vu.thaia...@gmail.com on 20 Apr 2011 at 7:37

GoogleCodeExporter commented 9 years ago 
There are some code repositories exists.

 1. original Android source code. http://android.git.kernel.org/
 2. CodeAurora project. https://www.codeaurora.org/gitweb/quic/la/
 3. CyanogenMod https://github.com/CyanogenMod (~ OpenEtna 2.6.35)

- CyagngenMod : 2.6.35 / 2.6.38 but, Android (or old CodeAurora ?) based.
- CodeAurora : 2.6.32 / 2.6.35 but officially msm7x01a is not supported.

----
- OpenEtna 2.6.29 - ~CodeAurora - fast 2D/3D graphic.
- OpenEtna 2.6.35 - ~CyanogenMod - 2D graphic is slower than OpenEtna 2.6.29
----
currently OpenEVE is try to sync with latest CodeAurora 2.6.32 (LG official 
source is basically based on CodeAurora)

Original comment by wkp...@gmail.com on 20 Apr 2011 at 7:53

GoogleCodeExporter commented 9 years ago 
but i'm worry for our old kenel

Original comment by binhanh...@gmail.com on 20 Apr 2011 at 8:10

GoogleCodeExporter commented 9 years ago 
Voice not routed to speaker in normal mode. Have to switch to speaker phone 
mode.

Original comment by iareh...@gmail.com on 20 Apr 2011 at 12:43

GoogleCodeExporter commented 9 years ago 
Sorry iareh, can you please describe that in more detail, I don't know what 
that means.

Original comment by rais...@gmail.com on 20 Apr 2011 at 1:17

GoogleCodeExporter commented 9 years ago 
1. dial a number
2. when other person receives call
3. I cant hear other person
4. tap on speaker button during call
5. speaker is turned on
6. now I can hear other party

But it happened once or twice

Original comment by iareh...@gmail.com on 20 Apr 2011 at 1:57

GoogleCodeExporter commented 9 years ago 
after installing boot-gb-110420-snapshot.zip ,i can not hear anything while 
calling , and no one can hear me .

Original comment by justsad.eng@gmail.com on 20 Apr 2011 at 2:46

GoogleCodeExporter commented 9 years ago 
Oh, ok thanks for explaining.
That hasn't happened to me yet, but now I will know what to look out for.

I have a similar issue, the audio in call is just very very quiet, but I can 
hear the caller. if I turn on the speaker, then the call volume is too loud, so 
I have to keep the phone farther from my ear.

Am I supposed to run the update patch again to fix the in call volume?
Does this maybe have something to do with libaudio.so?

Did you have the problem with kernel panics after disconnecting USB?

Original comment by rais...@gmail.com on 20 Apr 2011 at 4:37

GoogleCodeExporter commented 9 years ago 
@rais.... I can't say what you have to do. I did'nt notice that call volume is 
too low. I just turned on speaker. I have no problem with call volume now (dont 
know how :)). No kernel panics after diconnecting USB.

Original comment by iareh...@gmail.com on 20 Apr 2011 at 5:45

GoogleCodeExporter commented 9 years ago 
No worries, my first call had no issues, my second call was very quiet, my 
third call had no issues, my fourth call was quiet but audible, but maybe just 
because the caller was quiet.

I noticed that during a call, if I plug my headphones into the phone to use as 
handsfree, the internal mic still works (the caller can hear me), but I only 
hear some background noise/static on the headphones, not the caller.

I still have to try with a headset/mic combination.

Original comment by rais...@gmail.com on 21 Apr 2011 at 3:17

GoogleCodeExporter commented 9 years ago 
hi, i installed the latest snapshot boot from the downloads, but the phone 
hangs in the boot screen, nothing is happening, i waited for more than 15 
minutes, still nothing .

Original comment by yakaaith...@gmail.com on 22 Apr 2011 at 5:58

GoogleCodeExporter commented 9 years ago 
Installed for the third time and its fine now

Original comment by yakaaith...@gmail.com on 22 Apr 2011 at 7:13

GoogleCodeExporter commented 9 years ago 
tested boot-gb-110421-snapshot, in a GW620 with 850mhz operator:

Allmost everithing running at this time, except:

Video camera freezes
Cant make calls

*im tested the usb connect and disconnect the usb many times, a this time i 
haven't a kernel panic, in my case it works fine

Original comment by nightcra...@gmail.com on 26 Apr 2011 at 2:30

GoogleCodeExporter commented 9 years ago 
new CM 7.0.1 has been released! :)

Original comment by vu.thaia...@gmail.com on 26 Apr 2011 at 4:00

GoogleCodeExporter commented 9 years ago 
   hi, i installed the latest snapshot boot from the downloads, but the phone hangs
   in the boot screen, nothing is happening, i waited for more than 15 minutes, still
   nothing.

Have a fix for your problem.
Had the same problem after moving from OpenEtna to OpenEve.
Use fastboot to remove your Userdata and cache.
Then install the system.img
http://www.n2k1.openetna.mayix.net/firmware/open_eve/gingerbread_with_update1104
12a_all_keyboards/system.zip
Then use the recovery image to install the boot.zip.
Then install the new GAPPS with the Recovery Image from the zip file.
http://goo-inside.me/google-apps/gapps-gb-20110307-signed.zip

Then everythnig should run fine.

Original comment by Katzen...@gmail.com on 26 Apr 2011 at 8:11

GoogleCodeExporter commented 9 years ago 
@Katzen
I recently moved from GB to Froyo. Main problem was attending a call. I could 
make calls and receive too but some times phone did not respond while receiving 
a call. Caller thinks that call was dropped by me. Does your solution works for 
that problem?
actually I did steps you provided except final step for installing GAPPS.

Original comment by iareh...@gmail.com on 26 Apr 2011 at 9:02

GoogleCodeExporter commented 9 years ago 
I have this GB 2.3.3 Alpha Testing Image and my problem was only one time.
After restarting my phone this problem has gone away.
And i didn't deactivate "Display name".
The erassing of the userdata and cache and reinstall the firmware is the last 
option and it is always succesfull except on devices with damaged hardware. ^^
But if you syncronized your contacts with your google account then you can 
remove your userdata and cache and reinstall this sweety mobile phone. =)

Original comment by Katzen...@gmail.com on 26 Apr 2011 at 11:15

GoogleCodeExporter commented 9 years ago 
wkpark are you going to do a system image with latest CM 7.0.1 version?

Original comment by andreabe...@gmail.com on 26 Apr 2011 at 1:56

GoogleCodeExporter commented 9 years ago 
i guess CM 7.0.2 is out today. i guess we can upgrade the system img to the 
latest CM release. ? 

WKPARK, are we working on this. ?

Original comment by yakaaith...@gmail.com on 26 Apr 2011 at 2:05

GoogleCodeExporter commented 9 years ago 
currently, version number do not matter.

I always work on the git snapshot of the CM7 :)
and the Beta will be relased based on some point of CM snapshot.

Original comment by wkp...@gmail.com on 26 Apr 2011 at 2:23

GoogleCodeExporter commented 9 years ago 
we are expecting a beta soon with added functionality.. waiting for release 
soon.:)

Original comment by yakaaith...@gmail.com on 26 Apr 2011 at 2:42

GoogleCodeExporter commented 9 years ago 
Can you provide a newer snapshot system image file? :)

Original comment by andreabe...@gmail.com on 26 Apr 2011 at 9:03

GoogleCodeExporter commented 9 years ago 
we are awaiting for a new release a beta :D or anything new!

Original comment by jjcastil...@gmail.com on 26 Apr 2011 at 10:51

GoogleCodeExporter commented 9 years ago 
Yeah. I'm waiting since hours. :D

Original comment by Katzen...@gmail.com on 27 Apr 2011 at 8:01