search

xzckiller / openeve

Automatically exported from code.google.com/p/openeve
0 stars 1 forks source link

gps not working correctly #94

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
gps not working correctly, almost never takes signal. I have the latest version 
of gingerbread with the update that fixes the 2d graphics and I have the 236mb 
boot. v20g had before. I have not 3g connection.

PD: excuse my English was the result of the google translator ... I speak only 
Spanish

Original issue reported on code.google.com by caraball...@gmail.com on 11 May 2011 at 3:59

GoogleCodeExporter commented 9 years ago 
GPS works nicely with gingerbread....

Original comment by iareh...@gmail.com on 11 May 2011 at 4:10

GoogleCodeExporter commented 9 years ago 
Please attach logcat and dmesg.

Original comment by Katzen...@gmail.com on 11 May 2011 at 8:59

GoogleCodeExporter commented 9 years ago

Original comment by wkp...@gmail.com on 11 May 2011 at 1:35

GoogleCodeExporter commented 9 years ago 
works fine & more faster find satellites then before

Original comment by Fedo...@gmail.com on 11 May 2011 at 3:26

GoogleCodeExporter commented 9 years ago 

traducción del español al inglés
when I turn the gps on my phone gets no coverage provided, sometimes Navitel at 
least I can see that although satellite signal is not good (shown in yellow) 
but does not give the location. googlemaps only shows that can not find my 
location.

however I have tested with a huawey um840 in the same time and this if you give 
the correct location.

Original comment by caraball...@gmail.com on 11 May 2011 at 7:29

Attachments:

GoogleCodeExporter commented 9 years ago 
did you really turn on GPS ?

logcat does not say about GPS at all.

Original comment by wkp...@gmail.com on 11 May 2011 at 9:47

GoogleCodeExporter commented 9 years ago 
 traducción del español al inglés
yes, i turned on detection using both wireless networks as well as using GPS 
satellites.
also my phone does not detect the 3G networks.
my modem version is kh-5200-v20g and the android version is 2.3.4 boot 110509 
(236mb memory), system CyanogenMod7.1.0-RC0 (Gingerbread2.3.4) 5/6 SNAPSHOT 
with the 2d and ril updates...

Original comment by caraball...@gmail.com on 11 May 2011 at 11:03

GoogleCodeExporter commented 9 years ago 
GPS doesn't work without wireless connection .
The GPS satellite doesn't work at all .
Google Map(v5.4.0) only works with wireless connection .
So GPS doesn't work correctly !
2.3.3's GPS is fine .
2.3.4's isn't ...
And check issue 23 ,please...
Whatever,nice work,man !

Original comment by PoweredB...@gmail.com on 12 May 2011 at 3:14

GoogleCodeExporter commented 9 years ago 
@PoweredB
Can you test your GPS on an other firmware ? Maybe it's an hardware problem 
comming from your phone.

Original comment by m.pluvin...@gmail.com on 12 May 2011 at 3:24

GoogleCodeExporter commented 9 years ago 
GPS works correctly !
Confirmed !
The key is the Satellite signal !

Original comment by PoweredB...@gmail.com on 12 May 2011 at 4:04

GoogleCodeExporter commented 9 years ago 
traducción del español al inglés
Today I have installed another firmware to my phone to test the gps and it 
worked well even inside the house with original Froyo v20d (installing with 
fichero.kdz as step one and installing 2.3.4 gingerbread as step two). but with 
this rom not take my phone signal (v20d).

Then I tried the same procedure but with v20e and at least my phone works much 
like the v20g. I do not know exactly where it can affect the changes I made at 
the reception of GPS, but still share it with you to get their views.

Original comment by caraball...@gmail.com on 13 May 2011 at 12:53

GoogleCodeExporter commented 9 years ago

Original comment by wkp...@gmail.com on 18 May 2011 at 3:57