search

yaapu / FrskyTelemetryScript

A LUA telemetry script and widget for the Horus X10(S),X12 and Taranis X9D+,X9E,QX7 and X-Lite radios using ArduPilot frsky passthru protocol
GNU General Public License v3.0
434 stars 140 forks source link

Where to download working OpenTX firmware? #49

Closed DroneMang closed 4 years ago

DroneMang commented 4 years ago

Hi,

On a clean install of OpenTX Companion, there seems to be no way to get any firmware other than the newest 2.3.5, which doesn't work correct? I do not have any prior firmwares saved. I am assuming that 2.3.4 is the last working one with this telemetry script? Is there any chance someone can post a working firmware for this telemetry? Thanks!

-DroneMang

yaapu commented 4 years ago

Hi, sorry for the late reply. If you have a taranis you can use 2.3.4, if you have a Horus or T16 you better use 2.3.5

DroneMang commented 4 years ago

Hi,

I can't seem to find anywhere to download the actual 2.3.4 firmware. I can download open tx companion in that version, but their website only allows me to download the SD card contents and open tx defaults to the newest firmware version. Maybe there is something simple I am not seeing. Thanks!

DroneMang

On Sun, Mar 1, 2020, 4:39 AM Alessandro Apostoli notifications@github.com wrote:

Hi, sorry for the late reply. If you have a taranis you can use 2.3.4 https://www.open-tx.org/2019/12/23/opentx-2.3.4, if you have a Horus or T16 you better use 2.3.5

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/yaapu/FrskyTelemetryScript/issues/49?email_source=notifications&email_token=AIZZJSBJS4MBTMJTWJXK4VTRFIUN3A5CNFSM4K3OVUD2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOENMZ6ZA#issuecomment-593076068, or unsubscribe https://github.com/notifications/unsubscribe-auth/AIZZJSAFQVUXNHV5SZ6KQE3RFIUN3ANCNFSM4K3OVUDQ .

stevie22b commented 4 years ago

Hi DroneMang, Did you ever solve this? I am having the same issue, cannot find anyway of going back to 2.3.4 on my Taranis X9D Plus. On 2.3.5 i cannot save any changes i make to Yaapu.

Thanks, Steve.

yaapu commented 4 years ago

@stevie22b , @DroneMang this is the version I am using on my X9D+, I take no responsabilities if you use my build :-)

opentx-2.3.4-lua-flex-en.zip

build options are: crossfire, flexr9m, multimodule,lua and luac

stevie22b commented 4 years ago

Thank you Yaapu,

That sounds like it will work for me - i am also using the flex9m. I am very grateful for the link. I cannot see why it should not work on my radio, but i will do plenty of tests before flight.

Thanks once again,

Steve.

stevie22b commented 4 years ago

All working perfectly! And i am now able to save config changes to the brilliant Yaapu script. And i have checked through all my models and all seem to be working fine with the firmware you linked to. I am so glad i can now save changes, was a bit soul destroying after finally getting the frsky S.Port link working, only to find i could save any changes to the config. I am very grateful for your help.

Thanks very much once again.

Steve.

skystarUK commented 4 years ago

I have the same problem, I want to get 2.3.4 to avoid the bug in 2.3.5 . I can't get Companion to download it. I read on opentx github that this is the intent not to allow d/l of older versions.

Unfortunately I can't use your file as I am using Taranis x9d (Not x9d+ ) I'm not sure how different it is, I read on forums x9d+ is very little different from x9d, even so, I don't want to risk crashing my drone. What about using 2.2 ? does that still work ok with your script ?

yaapu commented 4 years ago

yes 2.2.4 works really good