Open NaghmehAkbari opened 2 weeks ago
Hi Naghmeh,
I have no idea why you encounter such an issue if you are running the case that I provided on github. The yaw DOF must be deactivated in AQWA if you are using the AQWA with a version not later than 2023R1. The connection stiffness cannot be transfer into the time domain analysis in earlier AQWA. However, this capability is implemented within 2023R1 and later AQWA program. The initial design of the mooring system of the spar model is a delta-type. The torsional stiffness must be corrected using an additional stiffness. Maybe you can check for that.
Yang Yang Ningbo University - Associate Professor +86-0574-87604348 @.*** 169 South Qixing Road, Ningbo Postcode: 315832 Web: hyxy.nbu.edu.cn/info/1178/10531.htm |
---|
---- Replied Message ---- | From | @.> | | Date | 6/20/2024 17:39 | | To | @.> | | Cc | @.***> | | Subject | [yang7857854/F2A] High VNB velocity - FF wind array boundary (Issue #7) |
Dear Dr Yang Yang I use F2A to model OC3_hywind and I have this error. The total time simulation is 2000 sec and TD is 0.005. Wave significant amplitude and period is 3.17 m and 10.99 s. Wind speed is 10.5 m/s. May I ask you to give me an advice to fix this issue? Naghmeh
f2a.JPG (view on web)
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>
Dear Dr Yang Yang I use F2A to model OC3_hywind and I have this error. The total time simulation is 2000 sec and TD is 0.005. Wave significant amplitude and period is 3.17 m and 10.99 s. Wind speed is 10.5 m/s. May I ask you to give me an advice to fix this issue? Naghmeh