yaourdt / mgos-to-tasmota

A minimal firmware for OTA (over the air) flashing Tasmota, HAA, or ESPurna from Mongoose OS or compatible firmware types.
GNU General Public License v3.0
417 stars 67 forks source link

Warning, will brick your device. #40

Open jimmyw opened 3 years ago

jimmyw commented 3 years ago

Bricked 2 Plug S.

One i had updated to latest firmware, one was not toched before i tried.

Did follow instructions, after ota device rebooted keeping its ip and you could se a filesystem if you visited the old address.

After quite a long time, 15 minutes or so the device rebooted.

No tasmota, did attach serial, and can se a repeating message sent, but could not decode the baudrate.

Tried 115200, 57600, 74880 could not decode anything.

Pulled GPIO 0 low, got esptool.py working, but flashing tasmota failed.

jimmyw commented 3 years ago

Got some serial output:

rBoot v1.2.1 - richardaburton@gmail.com
Flash Size:   16 Mbit
Flash Mode:   DIO
Flash Speed:  40 MHz
rBoot Option: Big flash

Booting rom 0 (0x8000).
add i
bcn 0
del if1
usl
mode : null
mode : sta(e0:98:06:b5:7d:8d)
add if0
sleep disable
WPA2 ENTERPRISE VERSION: [v2.0] disable

SHPLG-S-B57D8D E0:98:06:B5:7D:8D

scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 5
cnt 
pm open,type:0 0
state: 5 -> 0 (2)
rm 0
pm close 7
reconnect
scandone
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 5
cnt 

connected with JNET, channel 11
dhcp client start...
ip:192.168.1.126,mask:255.255.255.0,gw:192.168.1.1
pm open,type:0 0
state: 5 -> 0 (0)
rm 0
pm close 7
del if0
usl
mode : null

 ets Jan  8 2013,rst cause:2, boot mode:(3,7)

load 0x40100000, len 1884, room 16 
tail 12
chksum 0x4b
ho 0 tail 12 room 4
load 0x3ffe8000, len 824, room 12 
tail 12
chksum 0x24
csum 0x24?????.@k??%x?t.v?~?k?(q????j?(v ??JEN(|?xJ~?-(?c #?-A%v?-.??x ??+P?n???Xvj|?? ??cPz~?h?n?,PJx~????kAj?????n?+?kA,%,R???8?V2
esp_main.c:165          shelly-plug-s 0.4.6 (20210118-130847)
esp_main.c:167          Mongoose OS 2.19.0 (20210118-130847/2.19.0-ge456939) sp 0x3ffffe80
esp_main.c:169          CPU: ESP8266EX, 160 MHz, RAM: 52936 total, 49852 free
esp_main.c:173          SDK 3.0.5-dev(52383f9); flash: 2M
esp_exc.c:235           Reset cause: 4 (soft reset)
mongoose.c:15676        Mongoose 6.18, LwIP 2.1.2
mongoose.c:4938         mbed TLS 2.16.6-cesanta1
mgos_vfs_dev.c:72       sfl0: sysflash (), size 2097152
mgos_vfs_dev.c:72       root: part ({"dev": "sfl0", "offset": 1814528, "size": 262144}), size 262144
mgos_vfs.c:173          /: SPIFFS @ root, opts {"bs":4096,"ps":256,"es":4096}
mgos_vfs.c:344          /: size 233681, used: 32881, free: 200800
esp_ota_backend.c:480   Mounting old FS: 262144 @ 0xbb000
mgos_vfs_dev.c:72       oldroot: part ({"dev": "sfl0", "offset": 765952, "size": 262144}), size 262144
mgos_vfs.c:173          /old: SPIFFS @ oldroot, opts {bs:4096,ps:256,es:4096}
mgos_vfs.c:344          /old: size 233681, used: 61997, free: 171684
mgos_file_utils.c:36    Copying /old/index.html.gz -> //index.html.gz
mgos_file_utils.c:36    Copying /old/cert.pem -> //cert.pem
mgos_file_utils.c:36    Copying /old/passwd -> //passwd
mgos_file_utils.c:36    Copying /old/hwinfo_struct.json -> //hwinfo_struct.json
mgos_file_utils.c:36    Copying /old/self_test -> //self_test
mgos_file_utils.c:36    Copying /old/conf9.json -> //conf9.json
mgos_sys_config.c:232   Loading conf9.json
mgos_config_util.c:110  Extra key: [dns_sd]
mgos_config_util.c:110  Extra key: [dns_sd.host_name]
mgos_config_util.c:110  Extra key: [dns_sd]
mgos_config_util.c:110  Extra key: [mqtt]
mgos_config_util.c:110  Extra key: [mqtt.will_topic]
mgos_config_util.c:110  Extra key: [mqtt]
mgos_config_util.c:110  Extra key: [first_boot]
mgos_config_util.c:110  Extra key: [wrong_sta_protect]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_enable]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_ssid]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_pass]
mgos_config_util.c:110  Extra key: [wrong_sta_protect]
mgos_config_util.c:110  Extra key: [timezone]
mgos_sys_config.c:368   MAC: e2:98:06:b5:7d:8d
mgos_sys_config.c:376   WDT: 30 seconds
esp_main.c:145          SDK: bcn 0
esp_main.c:145          SDK: del if1
esp_main.c:145          SDK: usl
esp_main.c:145          SDK: mode : null
mgos_wifi.c:88          WiFi STA: Using config 0 (JNET)
mgos_wifi.c:468         WiFi mode: STA
esp_wifi.c:118          WiFi mode: STA
esp_main.c:145          SDK: mode : sta(e0:98:06:b5:7d:8d)
esp_main.c:145          SDK: add if0
esp_main.c:145          SDK: sleep disable
mgos_wifi.c:270         WiFi STA: Connecting to JNET
mgos_rpc_channel_ua:313 0x3fff06ac UART0
main.c:288              FW booted from app1, waiting for network connection
mgos_init.c:33          Init done, RAM: 52936 total, 46168 free, 44056 min free
esp_ota_backend.c:599   Committing ROM 1
esp_ota_backend.c:590   cur 1 prev 0 fwu 0
mgos_ota_core.c:1329    UID: 035b81d28dc1badd, license: none
mgos_net.c:86           WiFi STA: connecting
esp_main.c:145          SDK: scandone
esp_main.c:145          SDK: state: 0 -> 2 (b0)
esp_main.c:145          SDK: state: 2 -> 3 (0)
esp_main.c:145          SDK: state: 3 -> 5 (10)
esp_main.c:145          SDK: add 0
esp_main.c:145          SDK: aid 5
esp_main.c:145          SDK: cnt 
esp_main.c:145          SDK: 
esp_main.c:145          SDK: connected with JNET, channel 11
esp_main.c:145          SDK: dhcp client start...
mgos_wifi.c:133         WiFi STA: Connected, BSSID 68:d7:9a:45:c5:22 ch 11 RSSI -67
mgos_net.c:90           WiFi STA: connected
esp_main.c:145          SDK: ip:192.168.1.126,mask:255.255.255.0,gw:192.168.1.1
mgos_net.c:101          WiFi STA: ready, IP 192.168.1.126, GW 192.168.1.1, DNS 192.168.1.1
main.c:261              device is online, downloading target firmware
mgos_mongoose.c:66      New heap free LWM: 36872
mgos_mongoose.c:66      New heap free LWM: 36352
mongoose.c:4912         0x3fff0994 ciphersuite: TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256
mgos_mongoose.c:66      New heap free LWM: 31360
mgos_mongoose.c:66      New heap free LWM: 30632
mgos_mongoose.c:66      New heap free LWM: 29224
esp_main.c:145          SDK: pm open,type:0 0
mgos_mongoose.c:66      New heap free LWM: 23088
mgos_mongoose.c:66      New heap free LWM: 18864
mgos_mongoose.c:66      New heap free LWM: 18712
mgos_mongoose.c:66      New heap free LWM: 18664
mgos_mongoose.c:66      New heap free LWM: 17696
mgos_mongoose.c:66      New heap free LWM: 17304
mongoose.c:4912         0x3fff0994 mbedtls_ssl_flush_output() returned -78 (-0x004e)
mongoose.c:4912         0x3fff0994 mbedtls_ssl_write_record() returned -78 (-0x004e)
mongoose.c:4912         0x3fff0994 mbedtls_ssl_send_alert_message() returned -78 (-0x004e)
main.c:162              HTTP status is 200, recieved 0 bytes

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
ets_main.c r
jimmyw commented 3 years ago

Again, mgos-to-tasmota recompiled with debug flags:

esp_main.c:145          SDK: connected with JNET, channel 6
esp_main.c:145          SDK: dhcp client start...
mgos_mongoose.c:66      New heap free LWM: 45448
mgos_wifi.c:133         WiFi STA: Connected, BSSID 68:d7:9a:45:ce:aa ch 6 RSSI -64
mgos_event.c:134        ev WFI2 triggered 0 handlers
mgos_net.c:90           WiFi STA: connected
mgos_event.c:134        ev NET2 triggered 2 handlers
esp_main.c:145          SDK: ip:192.168.1.126,mask:255.255.255.0,gw:192.168.1.1
mgos_mongoose.c:66      New heap free LWM: 45264
mgos_event.c:134        ev WFI3 triggered 0 handlers
mgos_net.c:101          WiFi STA: ready, IP 192.168.1.126, GW 192.168.1.1, DNS 192.168.1.1
main.c:261              device is online, downloading target firmware
main.c:253              fetching https://ota.tasmota.com/tasmota/release/tasmota.bin to 0x8000
mongoose.c:8604         https://ota.tasmota.com/tasmota/release/tasmota.bin use_ssl? 1 tcp://ota.tasmota.com:443
mongoose.c:3142         0x3fff096c tcp://ota.tasmota.com:443 -,-,*
mongoose.c:3142         0x3fff2964 udp://192.168.1.1:53 -,-,-
mongoose.c:3012         0x3fff2964 udp://192.168.1.1:53
mgos_event.c:134        ev NET3 triggered 2 handlers
mongoose.c:3026         0x3fff2964 udp://192.168.1.1:53 -> 0
mgos_mongoose.c:66      New heap free LWM: 37160
mongoose.c:3012         0x3fff096c tcp://65.9.43.127:443
mgos_mongoose.c:66      New heap free LWM: 36768
mongoose.c:3026         0x3fff096c tcp://65.9.43.127:443 -> 0
mongoose.c:4912         0x3fff096c ciphersuite: TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256
mgos_mongoose.c:66      New heap free LWM: 31776
esp_main.c:145          SDK: pm open,type:0 0
mgos_mongoose.c:66      New heap free LWM: 24152
mgos_mongoose.c:66      New heap free LWM: 19776
mongoose.c:4912         0x3fff096c mbedtls_ssl_flush_output() returned -78 (-0x004e)
mongoose.c:4912         0x3fff096c mbedtls_ssl_write_record() returned -78 (-0x004e)
mongoose.c:4912         0x3fff096c mbedtls_ssl_send_alert_message() returned -78 (-0x004e)
main.c:162              HTTP status is 200, recieved 0 bytes
main.c:174              last block dump done
main.c:33               block_copy start: cp 4096 bytes from 0x8000 to 0x9000
main.c:75               block_copy done
main.c:33               block_copy start: cp 4096 bytes from 0xf000 to 0xa000
main.c:75               block_copy done
main.c:33               block_copy start: cp 24576 bytes from 0x9000 to 0x1000
main.c:75               block_copy done
main.c:33               block_copy start: cp 4294934528 bytes from 0x10000 to 0x8000

 ets Jan  8 2013,rst cause:4, boot mode:(3,1)

wdt reset
ets_main.c
jimmyw commented 3 years ago
esp_main.c:145          SDK: aid 8
esp_main.c:145          SDK: cnt
esp_main.c:145          SDK:
esp_main.c:145          SDK: connected with JNET, channel 11
esp_main.c:145          SDK: dhcp client start...
mgos_wifi.c:133         WiFi STA: Connected, BSSID 68:d7:9a:45:c5:22 ch 11 RSSI -49
mgos_event.c:134        ev WFI2 triggered 0 handlers
mgos_net.c:90           WiFi STA: connected
mgos_event.c:134        ev NET2 triggered 2 handlers
esp_main.c:145          SDK: ip:192.168.1.126,mask:255.255.255.0,gw:192.168.1.1
mgos_event.c:134        ev WFI3 triggered 0 handlers
mgos_net.c:101          WiFi STA: ready, IP 192.168.1.126, GW 192.168.1.1, DNS 192.168.1.1
main.c:266              device is online, downloading target firmware
main.c:258              fetching https://ota.tasmota.com/tasmota/release/tasmota.bin to 0x8000
mongoose.c:8604         https://ota.tasmota.com/tasmota/release/tasmota.bin use_ssl? 1 tcp://ota.tasmota.com:443
mongoose.c:3142         0x3fff0e6c tcp://ota.tasmota.com:443 -,-,*
mongoose.c:3142         0x3fff0f84 udp://192.168.1.1:53 -,-,-
mongoose.c:3012         0x3fff0f84 udp://192.168.1.1:53
mgos_event.c:134        ev NET3 triggered 2 handlers
mongoose.c:3026         0x3fff0f84 udp://192.168.1.1:53 -> 0
mgos_mongoose.c:66      New heap free LWM: 36728
mongoose.c:3012         0x3fff0e6c tcp://65.9.57.86:443
mgos_mongoose.c:66      New heap free LWM: 36336
mongoose.c:3026         0x3fff0e6c tcp://65.9.57.86:443 -> 0
mongoose.c:4912         0x3fff0e6c ciphersuite: TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256
mgos_mongoose.c:66      New heap free LWM: 31344
esp_main.c:145          SDK: pm open,type:0 0
mgos_mongoose.c:66      New heap free LWM: 23720
main.c:96               Connected to ota server.
main.c:106              Got chunk size: 0 received: 0
mgos_mongoose.c:66      New heap free LWM: 19344
mongoose.c:4912         0x3fff0e6c mbedtls_ssl_flush_output() returned -78 (-0x004e)
mongoose.c:4912         0x3fff0e6c mbedtls_ssl_write_record() returned -78 (-0x004e)
mongoose.c:4912         0x3fff0e6c mbedtls_ssl_send_alert_message() returned -78 (-0x004e)
main.c:106              Got chunk size: 0 received: 0
main.c:167              HTTP status is 200, recieved 0 bytes
main.c:179              last block dump done
main.c:33               block_copy start: cp 4096 bytes from 0x8000 to 0x9000
main.c:75               block_copy done
main.c:33               block_copy start: cp 4096 bytes from 0xf000 to 0xa000
main.c:75               block_copy done
main.c:33               block_copy start: cp 24576 bytes from 0x9000 to 0x1000
main.c:75               block_copy done
main.c:33               block_copy start: cp 4294934528 bytes from 0x10000 to 0x8000

 ets Jan  8 2013,rst cause:4, boot mode:(3,1)

wdt reset
ets_main.c
jimmyw commented 3 years ago

Another try now, with a http server to download imafe from.

I get progress, but its slow. 500 bytes a minute until the webserver times out.

Any idea?

esp_main.c:165          shelly-plug-s 0.4.6 (20210501-230830)                                   �
esp_main.c:167          Mongoose OS 2.19.1 (20210501-230830/2.19.1-gd52032f) sp 0x3ffffe80       ��p�|����x��ǒ��p
esp_main.c:169          CPU: ESP8266EX, 160 MHz, RAM: 52936 total, 49852 free
esp_main.c:173          SDK 3.0.5-dev(52383f9); flash: 2M                                                        �nn��;�n����
esp_exc.c:235           Reset cause: 6 (sys reset)                                                                           �
mongoose.c:15676        Mongoose 6.18, LwIP 2.1.2                                                                             b�$rrp�n��
mongoose.c:4938         mbed TLS 2.16.6-cesanta1                                                                                        ����l�
mgos_vfs_dev.c:72       sfl0: sysflash (), size 2097152                                                                                       �
mgos_vfs_dev.c:72       root: part ({"dev": "sfl0", "offset": 1814528, "size": 262144}), size 262144                                           �
mgos_vfs.c:173          /: SPIFFS @ root, opts {"bs":4096,"ps":256,"es":4096}                                                                   b�n��n�$�
mgos_vfs.c:344          /: size 233681, used: 97388, free: 136293                                                                                        ��
mgos_sys_config.c:232   Loading conf9.jsonmgos_config_util.c:110  Extra key: [dns_sd]
mgos_config_util.c:110  Extra key: [dns_sd.host_name]
mgos_config_util.c:110  Extra key: [dns_sd]�
mgos_config_util.c:110  Extra key: [mqtt]   �
mgos_config_util.c:110  Extra key: [mqtt.will_topic]
mgos_config_util.c:110  Extra key: [mqtt]     p��<��
mgos_config_util.c:110  Extra key: [first_boot]     ��
mgos_config_util.c:110  Extra key: [timezone]         b��<~�n���
mgos_config_util.c:110  Extra key: [latitude]                   r��#�n�$�l`8`rn|��n��r��l`8���;��
mgos_config_util.c:110  Extra key: [longitude]                                                   ���
mgos_config_util.c:110  Extra key: [tz_utc_offset]
mgos_config_util.c:110  Extra key: [tz_next_dst_shift]
mgos_config_util.c:110  Extra key: [tz_next_utc_offset]
mgos_config_util.c:110  Extra key: [tz_has_dst]
mgos_config_util.c:110  Extra key: [tz_is_dst]
mgos_config_util.c:110  Extra key: [wrong_sta_protect]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_enable]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_ssid]
mgos_config_util.c:110  Extra key: [wrong_sta_protect.sta_pass]
mgos_config_util.c:110  Extra key: [wrong_sta_protect]
mgos_sys_config.c:368   MAC: e2:98:06:b5:7d:8d
mgos_sys_config.c:376   WDT: 30 seconds8��
mgos_deps_init.c:88     Init wifi 1.0...  r����8    �� #
esp_main.c:145          SDK: bcn 0                          �
esp_main.c:145          SDK: del if1                         r����8 �� #
esp_main.c:145          SDK: usl                                            �
esp_main.c:145          SDK: mode : null                                     r����8
mgos_wifi.c:88          WiFi STA: Using config 0 (JNET)                                 �� �
mgos_wifi.c:468         WiFi mode: STA                                                      �lrr�9l�Ğb��
esp_wifi.c:118          WiFi mode: STA                                                                  ��b��br�b����brc��
esp_main.c:145          SDK: mode : sta(e0:98:06:b5:7d:8d)                                                                ����l�x~�n�n����
esp_main.c:145          SDK: add if0                                                                                                      l���n��
esp_main.c:145          SDK: sleep disable                                                                                                       �
mgos_wifi.c:270         WiFi STA: Connecting to JNET                                                                                              �
mgos_deps_init.c:88     Init http-server 1.0...                                                                                                    l���
mgos_http_server.c:361  HTTP server started on [80]                                                                                                    �
mgos_deps_init.c:88     Init mbedtls 2.16.6-cesanta1...                                                                                                 �l`mgos_deps_init.c:88     Init ota-http-client 1.0...
mgos_deps_init.c:88     Init ota-http-server 1.0...
mgos_deps_init.c:88     Init rpc-common 1.0...
mgos_deps_init.c:88     Init rpc-service-config 1.0...
mgos_deps_init.c:88     Init rpc-uart 1.0...
mgos_rpc_channel_ua:313 0x3fff06bc UART0
mg_rpc.c:560            0x3fff06bc '' UART
mg_rpc.c:489            0x3fff06bc CHAN OPEN (UART UART0)
main.c:293              FW booted from app1, waiting for network connection
mgos_init.c:33          Init done, RAM: 52936 total, 46584 free, 46112 min free
mgos_event.c:134        ev MOS0 triggered 0 handlers
mgos_ota_core.c:991     1 0
mgos_ota_core.c:1329    UID: 035b81d28dc1badd, license: none
mgos_event.c:134        ev WFI1 triggered 0 handlers
mgos_net.c:86           WiFi STA: connecting
mgos_event.c:134        ev NET1 triggered 2 handlers
esp_main.c:145          SDK: scandone
esp_main.c:145          SDK: state: 0 -> 2 (b0)
esp_main.c:145          SDK: state: 2 -> 3 (0)
esp_main.c:145          SDK: state: 3 -> 5 (10)
esp_main.c:145          SDK: add 0
esp_main.c:145          SDK: aid 7
esp_main.c:145          SDK: cnt
esp_main.c:145          SDK:
esp_main.c:145          SDK: connected with JNET, channel 11
esp_main.c:145          SDK: dhcp client start...
mgos_mongoose.c:66      New heap free LWM: 45384
mgos_wifi.c:133         WiFi STA: Connected, BSSID 68:d7:9a:45:c5:22 ch 11 RSSI -55
mgos_event.c:134        ev WFI2 triggered 0 handlers
mgos_net.c:90           WiFi STA: connected
mgos_event.c:134        ev NET2 triggered 2 handlers
esp_main.c:145          SDK: ip:192.168.1.126,mask:255.255.255.0,gw:192.168.1.1
mgos_mongoose.c:66      New heap free LWM: 45264
mgos_event.c:134        ev WFI3 triggered 0 handlers
mgos_net.c:101          WiFi STA: ready, IP 192.168.1.126, GW 192.168.1.1, DNS 192.168.1.1
main.c:266              device is online, downloading target firmware
main.c:258              fetching http://my_server/jimmy/tasmota.bin to 0x8000
mongoose.c:8604         http://my_server/jimmy/tasmota.bin use_ssl? 0 tcp://my_server:80
mongoose.c:3142         0x3fff0cb4 tcp://my_serveru:80 -,-,-
mongoose.c:3142         0x3fff0d3c udp://192.168.1.1:53 -,-,-
mongoose.c:3012         0x3fff0d3c udp://192.168.1.1:53
mgos_event.c:134        ev NET3 triggered 2 handlers
mongoose.c:3026         0x3fff0d3c udp://192.168.1.1:53 -> 0
mgos_mongoose.c:66      New heap free LWM: 39240
mongoose.c:3012         0x3fff0cb4 tcp://5.150.197.40:80
mgos_mongoose.c:66      New heap free LWM: 38944
mongoose.c:3026         0x3fff0cb4 tcp://5.150.197.40:80 -> 0
main.c:96               Connected to ota server.
main.c:106              Got chunk size: 323 received: 0
main.c:106              Got chunk size: 536 received: 323
mgos_mongoose.c:66      New heap free LWM: 38616
main.c:106              Got chunk size: 1072 received: 859
main.c:106              Got chunk size: 536 received: 1931
esp_main.c:145          SDK: pm open,type:0 0
main.c:106              Got chunk size: 536 received: 2467
main.c:106              Got chunk size: 536 received: 3003
main.c:106              Got chunk size: 536 received: 3539
main.c:106              Got chunk size: 536 received: 4075
main.c:121              spi_flash_erase_sector: 8.
main.c:128              spi_flash_write: 32768, 0x3fff0f5c, 4096.
main.c:135              spi_flash_write done
main.c:106              Got chunk size: 536 received: 4611
main.c:106              Got chunk size: 536 received: 5147
jimmyw commented 3 years ago

@yaourdt Mark, do you have any idea? Not sure how to add additional logging.

juliogonzalez commented 3 years ago

@jimmyw exactly the same problem here. How did you manage to open the plug and access the serial connectors?

Can you share a some pictures? I'd like to avoid breaking the case, but I could not find any examples.

juliogonzalez commented 3 years ago

False alarm! I was alarmed by the fact that no LED was working... but eventually I realized that the Wifi for tasmota was present, and it seems it's working fine.

image

I am no expert on tasmota, but still if you want share how to open the plug, I can spare one to have a look and see if I can flash using a serial cable using esptool.py

juliogonzalez commented 3 years ago

I tried to flash another two, one worked, the other one failed. I wasn't really checking if I could see the filesystem via HTTP.

Right now:

I will be happy to try a few things, if someone tells me how to open the plug without destroying it :-)

@jimmyw how did you manage?

juliogonzalez commented 3 years ago

I feel stupid. It's just a matter of removing a phillips screw from the hole at the bottom of the smartplug.

After that, it's just a matter of following https://faulty.cloud/blog/shelly-plug-s-pinout (attaching the image with the pinout in case the blog is removed later):

image

If did not try to flash sonoff.bin, since I build a customized tasmota (it worked just fine):

esptool.py --port /dev/ttyUSB0 write_flash -fs 1MB -fm dout 0x0 ${HOME}/firmware.bin
esptool.py v3.0
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: e0:98:06:ab:8f:c4
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Compressed 553920 bytes to 396771...
Wrote 553920 bytes (396771 compressed) at 0x00000000 in 35.5 seconds (effective 124.8 kbit/s)...
Hash of data verified.

And ready: image

I have no clue of why this unit failed during the conversion. I'd not rule out a human error (meaning I used the wrong URL for the firmware).

But in any case, if someone else is having the same issue I described at my previous comment (not sure if it's the same @jimmyw had), fixing it is trivial as long as you have a FTDI adapter that provides 3,3v. No soldering is required if you are careful :-)

Ramalama2 commented 1 year ago

@juliogonzalez You're amazing, thank you!

It took 5 minutes to recover my briked shelly plug s. I had the same issue as jimmyw in the first post.

Cheers