search

yaourdt / mgos-to-tasmota

A minimal firmware for OTA (over the air) flashing Tasmota, HAA, or ESPurna from Mongoose OS or compatible firmware types.
GNU General Public License v3.0
416 stars 66 forks source link

http://dl.dasker.eu is unreachable #95

Open SebastianoDiCecio opened 1 year ago

SebastianoDiCecio commented 1 year ago

http://dl.dasker.eu is unreachable

Tobi266 commented 1 year ago

Has someone downloaded the zip-files before and can share it?

flo269 commented 1 year ago

Has someone downloaded the zip-files before and can share it?

https://github.com/yaourdt/mgos-to-tasmota/releases/tag/release-v0.4.6

Tymose commented 1 year ago

You can also change browser command if you are using it. From: "- http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyXX.zip" To: "+ http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyXX.zip"

See fork https://github.com/alexdelprete/mgos-to-tasmota for proper command (it is old but working).

mkroeber commented 1 year ago

Same here... i tryed http://192.168.178.90/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-Shelly1PM.zip with the result: "Not found"

The tasmota link seems to work.. at least it downloads the zip-file... The Shelly link seems to work, it opens the dashboard

What am i doing wrong?

LordMike commented 1 year ago

I came here because I'm trying to flash my Shelly Duo RGBW, of which I've already bricked two, but I wanted to try again.

I also found that Dasker was down, but luckily, all firmwares are available on a release, thanks for the link. I had troubles starting the flashing though, because specifically for ShellDuoRGBW, tasmota.com doesn't have it. I tried linking directly to the Github.com zip file, but even in http, it redirects to https, which I think Mongoose has an issue with.

So I started up a webserver (I use dotnet-serve) locally, and served the file through that.

  1. Open a terminal in the directory with your zip file
  2. Run dotnet-serve -a 0.0.0.0 -p 80 to start up a HTTP server on port 80
  3. Browse to it in a browser to verify it works, use your LAN IP, e.g. http://192.168.0.100/
  4. Get the link to your zip file, and build up the ota url like such: http://192.168.0.130/ota?url=http://192.168.0.100/mg2tasmota-ShellyMYDEVICE.zip

Hope this helps others in the future who struggle to serve a zip file over http :)

tmonxx commented 1 year ago

You can also change browser command if you are using it. From: "- http://shellyip/ota?url=http://dl.dasker.eu/firmware/mg2tasmota-ShellyXX.zip" To: "+ http://shellyip/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyXX.zip"

See fork https://github.com/alexdelprete/mgos-to-tasmota for proper command (it is old but working).

Is done! Thank You :)

owenhankey commented 1 year ago

I came here because I'm trying to flash my Shelly Duo RGBW, of which I've already bricked two, but I wanted to try again.

I also found that Dasker was down, but luckily, all firmwares are available on a release, thanks for the link. I had troubles starting the flashing though, because specifically for ShellDuoRGBW, tasmota.com doesn't have it. I tried linking directly to the Github.com zip file, but even in http, it redirects to https, which I think Mongoose has an issue with.

So I started up a webserver (I use dotnet-serve) locally, and served the file through that.

  1. Open a terminal in the directory with your zip file
  2. Run dotnet-serve -a 0.0.0.0 -p 80 to start up a HTTP server on port 80
  3. Browse to it in a browser to verify it works, use your LAN IP, e.g. http://192.168.0.100/
  4. Get the link to your zip file, and build up the ota url like such: http://192.168.0.130/ota?url=http://192.168.0.100/mg2tasmota-ShellyMYDEVICE.zip

Hope this helps others in the future who struggle to serve a zip file over http :)

Hi, i tried using dontnet serve but it only gave me the ip of http://localhost. i tried changing the ip address but got errors

Unexpected error: System.Net.Sockets.SocketException (49): Can't assign requested address

how do i get a local ip address rather than local host?

LordMike commented 1 year ago

You need to find your LAN IP address, this is typically of the form 192.168.x.x or 10.x.x.x. Use ipconfig to see what your address is.

owenhankey commented 1 year ago

Thanks! i got it. it tried to flash but it didnt work and now its bricked. but thanks for your help. gonna try opening it up and flashing it directly

23tom23 commented 1 year ago

Hi, I'm trying to flash a Shelly Duo RGBW. The browser always shows this message:

URL: http://192.168.1.172/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyDuoRGBW.zip

Browser: {"status":"updating","has_update":false,"new_version":"20221027-085547/v1.12.1-ga9117d3","old_version":"20201008-085327/master@a3d98bb0","beta_version":"20230329-161055/v1.13.0-rc2-g1b3e5af"}

The Shelly doesn't blink.

What am I doing wrong?

LordMike commented 1 year ago

Enable debug logging on the shelly page (under settings somewhere).. Do the update, wait a little (20s or so), and then download the log from the same page. It should contain hints as to what's up.

thunder312 commented 1 year ago

Hi folks, I just tried to flash my Shelly RGBW2 with Tasmota. The links was (using tasmota, because dasker is offline): http://192.168.178.75/ota?url=http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip Is it possible, that the pre-built patch isn't suitable? Because as far as I read the log (below), the Shelly accepts only patches with "rgbw2- color" or "rgbw2-white". Yes the shelly can handle 1 color led stripe or 4 white led stripes. I tried both modes, before patching. Do I need to build my own patch? Please say no. :-/

The JSON output was: _{"status":"updating","has_update":false,"new_version":"20230511-223416/v1.13.1-gb0b8c19","oldversion":"20230511-223416/v1.13.1-gb0b8c19"}

As you can see: old version = new version, which is the newest Shelly default firmware.

The LOG: _122687570:1687699693973873 mgos_sys_config.c:323 Saved to conf9.json 122967750 mgos_http_server.c:180 0x3fff2a04 HTTP connection from 192.168.178.98:50679 125867680 mgos_http_server.c:180 0x3fff2a04 HTTP connection from 192.168.178.98:50680 125887472 json.c:426 RAM: 50936 total, 35220 free 130219455 mgos_http_server.c:180 0x3fff2b34 HTTP connection from 192.168.178.98:50681 130227358 shelly_update.c:168 Starting ota from http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip 130253967 mgos_http_server.c:180 0x3fff2b34 HTTP connection from 192.168.178.98:50682 130733276 mgos_ota_http_clien:276 Update URL: http://ota.tasmota.com/tasmota/shelly/mg2tasmota-ShellyRGBW2.zip 130895693 mgos_ota_core.c:268 Starting, timeout 240, commit timeout 0, mem 34416 130936458 mgos_ota_core.c:652 FW: rgbw2 esp8266 0.3.1 20201204-114410 sig 0x00 130940819 shelly_update.c:90 BEGIN: rgbw2 130944970 shelly_update.c:98 will not update rgbw2-white with rgbw2 130949113 cloud_aes.c:165 Cloud already closed or not connected 130954564 mgos_ota_core.c:1050 Update finished, result -13 (Aborted by event handler) 130965639 shelly_update.c:111 SHOTA: error Aborted by event handler 130969646 shelly_update.c:130 OTA is fubar 130974832 mgos_system.c:58 Rebooting in 500 ms 131429191 esp_main.c:138 SDK: state: 5 -> 0 (0) 131434069 esp_main.c:138 SDK: rm 0 131438529 esp_main.c:138 SDK: pm close 7 131446738 mgos_wifi.c:70 WiFi STA: Disconnected, reason: 8 131452463 esp_main.c:138 SDK: sleep enable,type: 2 131458280 mgos_net.c:84 WiFi STA: disconnected 131463387 shelly.c:312 WiFi status=1313166336; mode=1 131469132 coiot.c:491 Coap listener 0x3fff2274 is closed! 131474397 coiot.c:616 coapconnect, WIFI status=1313166336 mode=1

Thanks for helping,

Daniel