ybakiame / Ryzen-Hackintosh-OpenCore-MSI-B550M-MORTAR-WIFI

MSI B550M MORTAR WIFI Hackintosh EFI
119 stars 21 forks source link

Moneterty为什么需要降低 BIOS版本 #15

Closed destroyor closed 1 year ago

destroyor commented 2 years ago

测试了一下,不需要降低bios版本啊,win11和macos 12.0.1都很正常啊

destroyor commented 2 years ago

bios版本7c94v194,为了麻烦,执行的是全新安装。之前直接升级确实有bug,不知道啥原因,而且intelbluetoothfirmware最高只能用到2.0版本,2.0.1有时会有冲突。

截屏2021-11-13 下午6 46 25 截屏2021-11-13 下午6 45 47 截屏2021-11-13 下午6 46 36 截屏2021-11-13 下午6 47 21
ybakiame commented 2 years ago

我这边的情况是,只有7C94v12及以下版本能启动Monterey,但是不能启动windows11。windows10可以启动但Wi-Fi,和板载网卡都无法使用,蓝牙安装驱动后可以正常驱动。可能和我显卡是刷的vibos有关系。根据你的硬件情况不同,请自行测试。

destroyor commented 2 years ago

我也刷了vbios,改成了uefi bios,是亮机卡7750。这个板子实际上是有bug的,经常掉蓝牙(macos和win11都一样),不影响启动,需要在bios中手动开关一下。

p2mmao commented 2 years ago

测试了一下,不需要降低bios版本啊,win11和macos 12.0.1都很正常啊

我这里是7月的BIOS,无论从11.6升级还是全新安装12.0.1 蓝牙 WIIF和2.5G有线网卡全部识别不出来,你是咋搞定的?

Goooler commented 2 years ago

我这里的状况是 Bios 升级到 7c94v194 可以启动安装器,但是磁盘工具里面识别不到 nvme 的固态

lwj1994 commented 2 years ago

我也刷了vbios,改成了uefi bios,是亮机卡7750。这个板子实际上是有bug的,经常掉蓝牙(macos和win11都一样),不影响启动,需要在bios中手动开关一下。

不知道这个bug是硬件上的还是软件上的。挺糟心的,经常切到win的时候蓝牙没了

destroyor commented 2 years ago

可能是别的硬件问题吧,我把自己的OC文件放上来,你们愿意的可以试试,根据需要自己添加三码或是添加其他参数。 OC.zip

p2mmao commented 2 years ago

可能是别的硬件问题吧,我把自己的OC文件放上来,你们愿意的可以试试,根据需要自己添加三码或是添加其他参数。 OC.zip

用你的OC重新干净安装了一遍12.0.1,无线网卡,有线网卡和蓝牙还是出不来,有空把主板BIOS升级到最新版看看

p2mmao commented 2 years ago

BIOS已经升级到最新版,干净安装,无线网卡,有线网卡和蓝牙还是出不来 死心了:(

Levonhard commented 2 years ago

Finally after days trying, today I was able to pass through verbose boot to Monterey installation using destroyor OC, but now I'm facing a new problem, my HDD, SATA SSD and NVME are not showing, only my USB drive is showing in Disk Utility. I realize also that during installation process, at least, only the 2 blue USB ports from rear are working, so in order to go to installation I have to put my usb drive in one of the ports and mouse to another. I believe that wifi is not working too, since it's not showing the option to connect to wifi in the upper right side. I'm using the 7C94v194 beta bios. As I said I'm using destroyor OC with few changes to config.plist like added agdpmod=pikera boot arg since I have 6600xt, changed the processor type to 1537 and changed to 6 core into amd patch kernel since I have 5600x. So what can I do to get my HDD, SATA SSD and NVME to show into installation process?

ybakiame commented 2 years ago

Finally after days trying, today I was able to pass through verbose boot to Monterey installation using destroyor OC, but now I'm facing a new problem, my HDD, SATA SSD and NVME are not showing, only my USB drive is showing in Disk Utility. I realize also that during installation process, at least, only the 2 blue USB ports from rear are working, so in order to go to installation I have to put my usb drive in one of the ports and mouse to another. I believe that wifi is not working too, since it's not showing the option to connect to wifi in the upper right side. I'm using the 7C94v194 beta bios. As I said I'm using destroyor OC with few changes to config.plist like added agdpmod=pikera boot arg since I have 6600xt, changed the processor type to 1537 and changed to 6 core into amd patch kernel since I have 5600x. So what can I do to get my HDD, SATA SSD and NVME to show into installation process?

May be related to MSI motherboard.

destroyor commented 2 years ago

After so many practices, I realized that MSI B550 mortor may have different hardware edtions, and the USB ports differ from one anther. It is clear clear that B550 motherboards are not well-worked with Intel AX200/AX201 module , not only MSI B550s report bugs, and not only in the Hackintosh area.

destroyor commented 2 years ago

one more thing: in the installation process, i use the intelbluetooth.kext of 1.1.3version, and replace it with 2.0 version in the post-installation.

p2mmao commented 2 years ago

use paragon 17 in win10 to retore the mini image to your partition you want to install Monterey https://mega.nz/folder/vMMWGBrK#qMFm60btcoecRSysZPIS5Q

use this EFI to boot the OS: https://mega.nz/file/aZU2DDbR#QcUVljqXIxXcnv1nDPQSaVE0ls-0IIewTulbKFcjYzU

rclsmart commented 2 years ago

我们组建了一个QQ群,经过我们的测试,发现 Bios 升级到 7c94v194 ,5000系列的处理器(5600/5800/5900/5950)无法进入安装,必须要BIOS关闭网卡芯片(WiFi,蓝牙,有线网卡)才能进安装(主板不带WiFi,蓝牙的芯片可以直接进安装),但是但是,进去没有硬盘,对没错就是找不到硬盘,sata,m2,都不行。 同时我们还发现,其他系列的cpu可以正常安装,(就是较老的处理器,比如楼上的1700,)比较新的都不行。目前不知道怎么解决了.

georgwacker commented 2 years ago

I wonder what the differences are in ACPI that causes Monterey to fail and if we could potentially patch it.

Could someone with a 3xxx CPU post a complete DSDT/SSDT dump where Monterey is working? Perhaps on an earlier BIOS version as well? Please include the BIOS version in any case.

Goooler commented 2 years ago

Bios 更新了,试试新版行不行。

image

Goooler commented 2 years ago

我试过了,还是不行,绝望。

destroyor commented 2 years ago

实在要用 那就是pve虚拟机+显卡直通了

LatteCat commented 2 years ago

我们组建了一个QQ群,经过我们的测试,发现 Bios 升级到 7c94v194 ,5000系列的处理器(5600/5800/5900/5950)无法进入安装,必须要BIOS关闭网卡芯片(WiFi,蓝牙,有线网卡)才能进安装(主板不带WiFi,蓝牙的芯片可以直接进安装),但是但是,进去没有硬盘,对没错就是找不到硬盘,sata,m2,都不行。 同时我们还发现,其他系列的cpu可以正常安装,(就是较老的处理器,比如楼上的1700,)比较新的都不行。目前不知道怎么解决了.

我想加入 QQ 群,可以公布下群号么? 我的 5800x+MSI B550m wifi 安装和运行 Big Sur 11.6.4 都良好,但是启动 Monterey 11.2.1 就报 still waiting for root device,明明已经做了 USB 映射的 目前主板 bios 是 v19,试过降级 v12 之后,能重新进 bios,但是会出现显示器黑屏,无法进入系统的问题,无奈又换回了 v19

Goooler commented 2 years ago

弃坑吧,OSX 上面大佬都换到华硕了,我上个月直接换用 Ubuntu 了

LatteCat commented 2 years ago

那我还是咸鱼上买一个话说 B550M 吧,然后把微星的这个卖掉

rclsmart commented 2 years ago

4 2~XPSDG WSPV~_@}@WJF8 目前也不知道怎么解决