Open VladoPortos opened 5 years ago
Disable RAM
Il lun 20 mag 2019, 18:23 VladoPortos notifications@github.com ha scritto:
Hello, for life of me I can't get this to work. I bought the MLX90640 from aliexpress ( not the m5stack module ) soldered the VIN, GND, SCL, SDA and tried to connect it to m5stack ( Fire ( wont run the sketch), the Grey one and Black one ) but there are two SCL and SDA ports according docu, one set is on the side where the reset button is, and one set on the side where SD card fits... none of them works :( also there is no mention if it takes 5V or 3.3V... fo you have any picture how you have it connected ?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/yellowelise/M5Stack-Thermal-MLX90640/issues/1?email_source=notifications&email_token=ABPAJAO5RSGDZD5MS7AHICLPWLF63A5CNFSM4HODQ672YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4GUYRQ4A, or mute the thread https://github.com/notifications/unsubscribe-auth/ABPAJAKZ6J53R43RG35UF4DPWLF63ANCNFSM4HODQ67Q .
how :D
In Arduino IDE Psram disabled
Il lun 20 mag 2019, 18:48 VladoPortos notifications@github.com ha scritto:
how :D
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/yellowelise/M5Stack-Thermal-MLX90640/issues/1?email_source=notifications&email_token=ABPAJAJSDROHCA7JJW45HV3PWLI37A5CNFSM4HODQ672YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVZNSQI#issuecomment-494065985, or mute the thread https://github.com/notifications/unsubscribe-auth/ABPAJAPR46PARABRXSWN5Q3PWLI37ANCNFSM4HODQ67Q .
thanks that made the sketch running on Fire, but still no picture from sensor... no ack in console... maybe my sensor is dead.
Hello, for life of me I can't get this to work. I bought the MLX90640 from aliexpress ( not the m5stack module ) soldered the VIN, GND, SCL, SDA and tried to connect it to m5stack ( Fire ( wont run the sketch), the Grey one and Black one ) but there are two SCL and SDA ports according docu, one set is on the side where the reset button is, and one set on the side where SD card fits... none of them works :( also there is no mention if it takes 5V or 3.3V... fo you have any picture how you have it connected ?