Question - Saveimages

[oiacrasec]

Is there some saveimages (powersaves) compatible with 11.4.0.37 U?

[yellows8]

https://twitter.com/ylws8/status/858785891661336577

[oiacrasec]

Im using new 3ds xl with: N3DS_U_27648_usa_9221 otherapp (my version is 11.4.0.37 U)

What i did: 1) downloaded starter kit 2) downloaded N3DS_U_27648_usa_9221 and renamed to otherapp 3) put all files inside root folder of my 3ds sdcard through WI-FI 4) downloaded saveimages and selected saveimages_powersaves/cardids_c2fe009000000000/usa/N3DS_U_26624_usa_9221 5) I opened my ocarina of time, enter game named hax... the homebrew starts open, but crashes...

What did i wrong?

[oiacrasec]

@GamingAnimator my solution was:

i have bought CubicNinja and everything back to normal

[GamingAnimator]

@oiacrasec

Thank you for your feed back so it seems the answer is to go with another option. Thank you.

[GamingAnimator]

I just went and bought myself a brand stock new 3ds xl, problem solved

[joe-pacheco]

Hey @yellows8 , Has there been any developments on the next save release zip? If I read the posts right it seems we've been waiting on smea to do the dumps for the old 3ds. Has there been any developments on his end that you know of?

[yellows8]

twitter & meh

[cha0sify]

Hey @yellows8 , did you maked some progress here? if not, i would to use the hax on n3dsxl 11.5 and did some trys to build my own power save sav, but the output files dosnt work to write back. Got same filesize for the bin, but something ist wrong with my file header. Dont know if i did all right. Would love to see some updated build instructions, and a try my best.

Anywas thanks for your hard work and sorry for my bad english 😜😂

[lunarFlight]

@ChaOSChriS @yellows8

I'm on stock 11.5.0-38U and the hack will launch homebrew, but homebrew will crash mid-way and error out. Would there be a way to build the powersave ourselves?

[yellows8]

"Would there be a way to build the powersave ourselves?" <- "CFW" required.

[joe-pacheco]

Boot9strap?

On Aug 1, 2017 4:41 PM, "yellows8" notifications@github.com wrote:

"Would there be a way to build the powersave ourselves?" <- "CFW" required.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/yellows8/oot3dhax/issues/121#issuecomment-319526964, or mute the thread https://github.com/notifications/unsubscribe-auth/AceBaEf57DQEX3gy8NdATMY4IhdC1zoPks5sT7eJgaJpZM4NMw5O .

[yellows8]

doesn't matter

[joe-pacheco]

I followed the guides on 3dsguide, i have godmode9, boot9strap and lumia. Am I close to the requirements to dump a powersave for the hack? I saw the TUTs on doing the hack if I had cfw, do I just do it then dump the powersave?

[yellows8]

TBH, if you already have "CFW", there's zero reason to use saveimages.

[joe-pacheco]

If the process is doable I wanted to so that I could help everyone else who's been waiting on them. The only reason why I ended up putting custom firmware on was because I couldn't get this to work. I ended up spending a lot of money and a lot of time getting ahold of cubic Ninja and two other 3DS just so that I could figure out how to install custom firmware. I figure it this point I've got almost every 3DS necessary to put out the powersaves myself. I just don't know where to begin. If it's difficult then maybe I'll just leave it to the professionals, but if it's a simple task once you have custom firmware I've got no problem taking the time out.

[yellows8]

@joe-pacheco New3DS?

[joe-pacheco]

I have new 3ds xls and old 3dss. If that's what you're asking

[yellows8]

Er, don't remember if 3dshax-repo was ever used successfully with public stuff on New3DS tbh...

[ThePandaGod]

If anyone could make a save for 11.5.0-38U that would be much appreciated by many

[lunarFlight]

not all heros wear capes

[ThePandaGod]

and not all people understand how to create saveimages for oot3d

[joe-pacheco]

When you say public stuff are you meaning to imply that you have dev hardware?

On Aug 4, 2017 11:09 AM, "ThePandaGod" notifications@github.com wrote:

and not all people understand how to create saveimages for oot3d

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/yellows8/oot3dhax/issues/121#issuecomment-320316629, or mute the thread https://github.com/notifications/unsubscribe-auth/AceBaDVdUvciDtF28laDxGmcit7qEa6Eks5sU15AgaJpZM4NMw5O .

[yellows8]

no

[chairmanxyz]

Is nobody able to just make a save that includes the 11.5.0 payload? I have the hacked save and I have the payload, just don't have any idea how to put them together...

[lunarFlight]

I wonder if this would work.

1. use a homebrew N3DSXL to install OOT3DHax with splot installer
2. extract the save file from OOT3DHax with PowerSave

I don't have a N3DSXL with homebrew to try this, so its a guess, FYI

[chairmanxyz]

I don't have a homebrew'd 3ds. I have a n2DSXL and an o3DSXL both on 11.5.0. If yellow8 can combine the 11.5.0 payload in with his exploited save that should be all that's needed.

[ThePandaGod]

ok, so i was able to install smashhax onto an 11.5 3ds, ran sploit installer to get oot3d on my n3dsxl, and made a powersave for the haxx file (not tested, dont have a 2nd 3ds) but if anyone would try it out and get back to me about problems here is the file

AQEEd39e67c2_2017-08-0822-13-05(11.5 oot3dhax sav).zip

[chairmanxyz]

@ThePandaGod Looks good to me so far! Had no issues getting powersaves to recognize the save and injecting it into the cartridge. Homebrew loads just fine. Cheers!

[lunarFlight]

@ThePandaGod thank you! IT WORKS, was confused with a bunch of other files I downloaded... sorry about that

[cha0sify]

@ThePandaGod thanks for the work. but on my n3dsxl it says corrupt game data when starting zelda. But i think your sav is not for the eu region? Writing with powersaves adapter works fine.

Gesendet von meinem OnePlus ONE A2003 mit FastHub

[ThePandaGod]

You are correct, the file is for USA 3ds consoles, but this might work as a file (not entirely sure) AQEEd39e67c2_2017-08-0908-54-33(11.5 EUR oot3dhax Sav).zip

@ChaOSChriS

[cha0sify]

@ThePandaGod did a try, can inject it into the gamecard fine with Powersaves Software. When i am starting Ocarina of Time, its says me that the savegame is corrupted and needed to be deleted. Using N3DS_E_27649_9221as payload on sdcard. But thanks for your work!

Gesendet von meinem OnePlus ONE A2003 mit FastHub

[Overkill10491]

@ThePandaGod Is this save for N3DS? I have an o3DS with the latest firmware and it's not working.

[ThePandaGod]

n3ds only, payloads for 11.5 arent available on o3ds

[Overkill10491]

Damn. Either way, thanks for all the effort.

[nmagod]

The US 11.5 save works on my N3DSXL - the upper screen's text flashed by much faster than I had expected, but now I have to figure out what all I can do.

[KwasiAsante]

@ThePandaGod the US 11.5 save still says corrupt on my N3DSXL am I missing something with the powersave or files on my sd card?

[Mega611]

Has anyone got a jksm's save of ocarina of time with oot3dhax installed for 11.5 new3ds?

[Avatar1987]

hm.....AQEEd39e67c2_2017-08-0908-54-33(11.5 EUR oot3dhax Sav).zip doesnt work for EU

[HolidayOugi]

http://tiny.cc/oothaxsav Try this one for EU

[cha0sify]

@Milanpsmp wow, thank you! Working fine on eu n3dsxl

[Avatar1987]

@Milanpsmp Working on EU N2DSXL =) thank you!

[oiacrasec]

@ThePandaGod You did a very good job, thank you! I think we all can give him some donate for his effort.

Could you create a tutorial step by step teaching what you did? Other developers would apreciate to help maintain the project updated.

[HolidayOugi]

@oiacrasec (I'm not PandaGod but) the steps are really easy. If you an homebrewed/cfwed n3ds you can easily install oothax on the cartdrige using the sploit installer included in the Homebrew Starter kit. You then simply extract the save with the Powersaves and share it

[joe-pacheco]

The question I have is do you need a European console to make a European save or do you just use the European version of Ocarina of Time?

On Aug 11, 2017 10:46 AM, "Milanpsmp" notifications@github.com wrote:

@oiacrasec https://github.com/oiacrasec (I'm not PandaGod but) the steps are really easy. If you an homebrewed/cfwed n3ds you can easily install oothax on the cartdrige using the sploit installer included in the Homebrew Starter kit. You then simply extract the save with the Powersaves and share it

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/yellows8/oot3dhax/issues/121#issuecomment-321876530, or mute the thread https://github.com/notifications/unsubscribe-auth/AceBaL-IcBEqMdWCNSTfRhKr_0_hRlGDks5sXJOOgaJpZM4NMw5O .

[HolidayOugi]

I think an European cartdrige is enough, but I'm not sure. I don't another 3ds to test

[GreatWizard]

I just make a version of the 11.5 EUR SAV without the powersave header... You can use it with your Gateway launcher menu by example ;)

AQEP_OOTHAX_11_5_EUR.zip

[Mclaneinc]

Been a while, I have Powersaves and my OOT, EU, how do i use the sav file with this please.

Daughter driving me mad to mod Animal Crossing...

[HolidayOugi]

@mclaneinc Download the Homebrew Starter kit and the 11.5 New3DS ropbin from http://smealum.github.io/3ds/ and put them on your SD Card, then insert the save in the Powersaves3DS folder (PC User->Powersaves3DS) and restore it using the Powersaves PC Applications (you might want to backup your saves first because you'll lose them in the process). After that, just load up Ocarina and open the HAX Savefile. Just Press A as soon as the game loads and you'll be into the Homebrew Launcher

[Mclaneinc]

Hi there , I was just about to write back and say I've done it, I needed the correct filename for the sav to be recognised in Powersaves and yup, got the odd save file, hit a and up came the homebrew after some code..

But thank you for doing that so quick, I'll save it incase I need to do it again, daughter now very happy..