Device status after power failure is wrong i advanced settings

yhaugom / com.telldus

Homey support for Telldus Z-wave devices

5 stars 14 forks source link

Device status after power failure is wrong i advanced settings #16

Closed marcus-karlsson closed 5 years ago

marcus-karlsson commented 5 years ago

Under advanced settings "Setting device status after power failure" the legend is wrong Plug-in Switch mini (TZWP-102).

It reads: 0 = Always off (default) 1 = Remember Status 2 = Always on.

0 (zero) is actually equal to remember status, 1= Always on and 2 = Always off. I have tested this on several plugs with firmware version 771. Please correct this as it can be confusing and lead one to belive the plug-in switch is defective.

Thanks Marcus

yhaugom commented 5 years ago

Thank you for reporting this. Sorry for the inconvenience. Will be fixed in next version. I don't own the plugs myself, and didn't check the documentation well enough apparently. I see now that the tzwp-100 and the 102 have different logic on this, so it might be where the confusion came from.

marcus-karlsson commented 5 years ago

Thank You very much for quick response and quick action!