search

yilmazca / intel-i9-10900K-Asus-prime-Z490A-hackintosh

Hackintosh Stable system on Asus Prime Z490A with Opencore 0.5.9
56 stars 8 forks source link

internal USB 2.0 ports #6

Closed voelie closed 3 years ago

voelie commented 3 years ago

Unable to activate internal USB 2.0 ports , not even with usbinjectall ?

cjazinski commented 3 years ago

I have the same board but running on the i7. I was able to get the USBPorts mapped. I had problem with the InjectAll but after reading and re-reading I was able to build my USBPorts.kext. Internal USB is working as its powering the BT/Wifi card (Fenvi) until the ports where mapped correctly I was unable to use it.

USBPorts.kext.zip

voelie commented 3 years ago

Hi ,

What did you have to do exactely to get your usb ports mapped ? I can’t manage to do so using the normal way, This usbkext is not working for me , i have even less porte with it , maybe because i updated the bios to the latest version

Kind regards,

Pascal

Verstuurd vanaf mijn iPad

Op 4 sep. 2020 om 17:41 heeft Christopher Jazinski notifications@github.com het volgende geschreven:

 I have the same board but running on the i7. I was able to get the USBPorts mapped. I had problem with the InjectAll but after reading and re-reading I was able to build my USBPorts.kext. Internal USB is working as its powering the BT/Wifi card (Fenvi) until the ports where mapped correctly I was unable to use it.

USBPorts.kext.z

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

cjazinski commented 3 years ago

You would need to also modify your config to use the kext. I used the port mapping tool as he explained but my mapping looked different. This is what is shown my machine

Screen Shot 2020-09-04 at 11 27 22 AM

voelie commented 3 years ago

Hi ,

I understand what you mean , But what is the reason i cannot use my internal usb ports when using usbinjectall.kext ? If i van’t see them i cannot map them as well I have done this succesfully on other systems but for this board it seems to be an issue

Kind regards,

Pascal

Verstuurd vanaf mijn iPad

Op 4 sep. 2020 om 18:28 heeft Christopher Jazinski notifications@github.com het volgende geschreven:  You would need to also modify your config to use the kext. I used the port mapping tool as he explained but my mapping looked different. This is what is show my machine currently mapped out to.

Xt

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or unsubscribe.

ozbenwoo commented 3 years ago

I have same problem with internal USB ports mapping. I have same motherboard with i7 10700 cpu. everything works except internal USB ports, so my fenvi card bluetooth does not work because no power supply. I check the internal ports in Windows 10, the internal ports seem to under another USB hub. the hackintool can not show these internal ports. I am not too concerned with those internal USB ports, they are USB2 ports, bluetooth does not bother me.

voelie commented 3 years ago

There should be a way to fix this but how ... :)

voelie commented 3 years ago

You would need to also modify your config to use the kext. I used the port mapping tool as he explained but my mapping looked different. This is what is shown my machine

Screen Shot 2020-09-04 at 11 27 22 AM

I see that you have USR 1 & 2 in your usb list , i have never seen that , are those the internal usb ports ?

voelie commented 3 years ago

No matter what I try I cannot see the internal USB ports and I also tried USBInjectAll_v0.7.5_z490-p.kext but with that kext my hack won't even boot

Update : it boots with clover , i can now see more usb ports but still not the internals

voelie commented 3 years ago

okey I figured it out , all is working now usbports.zip