yucao24hours
commented
7 years ago 読みました 👐 初回のコメントなのでどうやってまとめていくといいか定まっていないけど、気になったところとかをめもしてみます。
:h key-notation
初めて読んだ。（いかに私が vim の詳細を気にしていなかったかがばれる...かもしれない）
*key-notation* *key-codes* *keycodes*
These names for keys are used in the documentation. They can also be used
with the ":map" command (insert the key name by pressing CTRL-K and then the
key you want the name for).
notation meaning equivalent decimal value(s) ~
-----------------------------------------------------------------------
<Nul> zero CTRL-@ 0 (stored as 10) *<Nul>*
<BS> backspace CTRL-H 8 *backspace*
<Tab> tab CTRL-I 9 *tab* *Tab*
*linefeed*
<NL> linefeed CTRL-J 10 (used for <Nul>)
<FF> formfeed CTRL-L 12 *formfeed*
<CR> carriage return CTRL-M 13 *carriage-return*
<Return> same as <CR> *<Return>*
<Enter> same as <CR> *<Enter>*
<Esc> escape CTRL-[ 27 *escape* *<Esc>*
<Space> space 32 *space*
<lt> less-than < 60 *<lt>*
<Bslash> backslash \ 92 *backslash* *<Bslash>*
<Bar> vertical bar | 124 *<Bar>*
<Del> delete 127
<CSI> command sequence intro ALT-Esc 155 *<CSI>*
<xCSI> CSI when typed in the GUI *<xCSI>*
<EOL> end-of-line (can be <CR>, <LF> or <CR><LF>,
depends on system and 'fileformat') *<EOL>*
<Up> cursor-up *cursor-up* *cursor_up*
<Down> cursor-down *cursor-down* *cursor_down*
<Left> cursor-left *cursor-left* *cursor_left*
<Right> cursor-right *cursor-right* *cursor_right*
<S-Up> shift-cursor-up
<S-Down> shift-cursor-down
<S-Left> shift-cursor-left
<S-Right> shift-cursor-right
<C-Left> control-cursor-left
<C-Right> control-cursor-right
<F1> - <F12> function keys 1 to 12 *function_key* *function-key*
<S-F1> - <S-F12> shift-function keys 1 to 12 *<S-F1>*
<Help> help key
<Undo> undo key
<Insert> insert key
<Home> home *home*
<End> end *end*
<PageUp> page-up *page_up* *page-up*
<PageDown> page-down *page_down* *page-down*
<kHome> keypad home (upper left) *keypad-home*
<kEnd> keypad end (lower left) *keypad-end*
<kPageUp> keypad page-up (upper right) *keypad-page-up*
<kPageDown> keypad page-down (lower right) *keypad-page-down*
<kPlus> keypad + *keypad-plus*
<kMinus> keypad - *keypad-minus*
<kMultiply> keypad * *keypad-multiply*
<kDivide> keypad / *keypad-divide*
<kEnter> keypad Enter *keypad-enter*
<kPoint> keypad Decimal point *keypad-point*
<k0> - <k9> keypad 0 to 9 *keypad-0* *keypad-9*
<S-...> shift-key *shift* *<S-*
<C-...> control-key *control* *ctrl* *<C-*
<M-...> alt-key or meta-key *meta* *alt* *<M-*
<A-...> same as <M-...> *<A-*
<D-...> command-key (Macintosh only) *<D-*
<t_xx> key with "xx" entry in termcap
-----------------------------------------------------------------------
Note: The shifted cursor keys, the help key, and the undo key are only
available on a few terminals. On the Amiga, shifted function key 10 produces
a code (CSI) that is also used by key sequences. It will be recognized only
after typing another key.
Note: There are two codes for the delete key. 127 is the decimal ASCII value
for the delete key, which is always recognized. Some delete keys send another
value, in which case this value is obtained from the termcap entry "kD". Both
values have the same effect. Also see |:fixdel|.
Note: The keypad keys are used in the same way as the corresponding "normal"
keys. For example, <kHome> has the same effect as <Home>. If a keypad key
sends the same raw key code as its non-keypad equivalent, it will be
recognized as the non-keypad code. For example, when <kHome> sends the same
code as <Home>, when pressing <kHome> Vim will think <Home> was pressed.
Mapping <kHome> will not work then.Vim のバージョンについて
最近のコンピュータでは、huge 機能セットよりも少ない機能セットを使用する理由はどこにもない!
というところの意図がいまいちわからんかった。 💻 の保存容量とか処理機能が十分なものが普通に流通しているから、っていうことかな？
GUI
ここを読んで :h gui というのがあるのを知って、gui-start してみようとしたけどできなかった。ちょっとあとで調べてみてまためもする。
highwide
ta1kt0me
5t111111
to0526
katorie
📆 期間
2016-12-04 (日) 〜 2016-12-10 (土)
📖 読む範囲
p. 5 〜 p. 24